English
Language : 

V7NB-30A180 Datasheet, PDF (1/2 Pages) Bel Fuse Inc. – NON-ISOLATED DC/DC CONVERTERS 12V Input / Programmable Output / 30A VRM 9.0 Compatible
NON-ISOLATED DC/DC CONVERTERS
12V Input / Programmable Output / 30A VRM 9.0 Compatible
V7NB-30A180 PRELIMINARY
• High efficiency means less power dissipation
• Remote on/off
• 2-Wire Remote sense
• Optional 5 bit voltage programming schemes
o Intel VRM 9.x compatible 1.1V to 1.85V
o Motorola compatible 1.0V to 1.68V
• Adaptive voltage positioning
Description
The V7NB-30A Series are non-isolated step down DC/DC converters providing up to 30A of output current and
designed to be compatible to the Intel VRM 9.0 / 9.1 VID codes. Standard features include remote on/off, over
current protection, remote sense and a power good signal. This product also makes use of adaptive positioning
to improve transient response performance. These products are specifically design to power a wide variety of
high performance microprocessors but may be used almost anywhere low-voltage silicon is being employed and
a nominal 12V source is available. Typical applications include file servers, work stations and other computing
applications.
Input Specifications
Parameter
Input Voltage Range
Input Current (disabled)
Input Current (full load)
Reflected Ripple Current
Min
10.8 VDC
Typ
30mA
Max
13.2 VDC
6A
100mA rms
Notes
With 100uF, 25mOhm
capacitor and 200nH of input
inductance.
Output Specifications
Parameter
Output Current
Set Point Accuracy
Adaptive Positioning
(Droop Impedance)
Ripple and Noise
Min
0A
1.81V
Turn on Time
Transient Response
Deviation
Settling Time
Remote Sense Compensation
Output Capacitance
1200uF
Typ
1.83
3.33 mOhm
20mV
8mS
90mV
175uS
±0.3VDC
Max
Notes
30A
1.85
no load, excluding Adaptive
positioning, VID 00000
16mS
20,000uF
pk-pk, 0 to 20MHz Bandwidth
Full load with two external
560uF oscon capacitors on
output.
di/dt = 5A/uS
Load step =50% of max load.
Cout = two 820uF OSCON
For applications requiring
higher or lower output
capacitance please consult
factory.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com