V7BC-16F2AX Datasheet, PDF (1/6 Pages) Bel Fuse Inc. – NON-ISOLATED DC/DC CONVERTERS 2.4V-5.5V Input 0.75V-3.63V/16A Output

NON-ISOLATED DC/DC CONVERTERS
2.4V-5.5V Input
0.75V-3.63V/16A Output
V7BC-16F2Ax Series
• Non-Isolated
• High Efficiency
• High Power Density
• OCP/SCP
• Fixed Frequency (300kHz)
• Flexible Output Voltage
Sequencing
• Remote On/Off
• Under-voltage Lockout (UVLO)
• Over Temperature Protection
• Remote Sense
• Wide Input
• Wide Trim
• Converter can sink and source
Current
• Active Low/High (option)
Description
The Bel V7BC-16F2Ax modules are a series of non-isolated DC/DC converters that can deliver up to 16A of
output current with full load efficiency of 94% at 3.3V output. These modules provide precisely regulated voltage
programmable via external resistor from 0.75Vdc to 3.63Vdc over a wide range of input voltage(2.4V-5.5V).
These modules have a sequencing feature that enables designers to implement various types of output voltage
sequencing when powering multiple voltages on a board. Their open-frame construction and small footprint
enable designers to develop cost and space-efficient solutions. Standard features include remote ON/OFF,
programmable output voltage and over current protection.
Part Selection
Output Voltage
0.75 V– 3.63V
Input
Voltage
2.4V – 5.5V
Max. Output
Current
16A
Max. Output
Power
58.1W
Typical
Efficiency
94%
Model Number
Active Low
V7BC-16F2AL
Note: Add “G” suffix at the end of the model number to indicate “Tray Packaging”.
Model Number
Active High
V7BC-16F2A0
Absolute Maximum Ratings
Parameter
Min
Typ
Input Voltage (continuous)
-0.3V
-
Output Enable Terminal Voltage
-0.3V
-
Sequencing Voltage ¹
-0.3V
-
Ambient Temperature
-40°C
-
Storage Temperature
-55°C
-
Max
5.8V
5.8V
Vin
85°C
125°C
Notes
Notes: All specifications are typical at 25°C unless otherwise stated.
1. V7BC-16F2Ax series of modules include a sequencing feature that enables users to implement
various types of output voltage sequencing in their applications. This is accomplished via an additional
sequencing pin. When the sequencing feature is not used, tie the SEQ pin to Vin.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com