English
Language : 

V7BA-06A2AX Datasheet, PDF (1/7 Pages) Bel Fuse Inc. – NON-ISOLATED DC/DC CONVERTERS 8.3V-14V Input 0.75V-5.0V/6A Output
NON-ISOLATED DC/DC CONVERTERS
8.3V-14V Input
0.75V-5.0V/6A Output
V7BA-06A2Ax Series
• Non-Isolated
• High Efficiency
• High Power Density
• Fixed Frequency
• Remote On/Off
• Active Low/High (option)
• Under-Voltage Lockout (UVLO)
• OCP/SCP
• Wide Input Range
• Wide Trim Range
• Flexible Output Voltage Sequencing
Description
The Bel V7BA-06A2Ax modules are a series of non-isolated DC/DC converters that deliver up to 6A of output
current with full load efficiency of 92% at 5.0V output. These modules provide precisely regulated voltage
programmable via external resistor from 0.75V to 5.0V over a wide range of input voltage (8.3V-14V). These
modules have a sequencing feature that enables designers to implement various types of output voltage
sequencing when powering multiple voltages on a board. The open-frame construction and small footprint
enable designers to develop cost and space-efficient solutions. Standard features include remote On/Off, over
current protection, short current protection, wide input, and programmable output voltage.
Part Selection
Output
Input
Voltage
Voltage
0.75V - 5.0V 8.3V - 14V
Max. Output
Current
6A
Max. Output
Power
30.0W
Typical
Efficiency
92%
Model Number
Active Low
V7BA-06A2AL
Note: Add “G” suffix at the end of the model number to indicate Tray Packaging.
Model Number
Active High
V7BA-06A2A0
Absolute Maximum Ratings
Parameter
Min
Typ
Input Voltage (continuous)
-0.3V
-
Output Enable Terminal Voltage
-0.3V
-
Sequencing Voltage 1
-0.3V
-
Ambient Temperature
-40°C
-
Storage Temperature
-55°C
-
Max
15V
15V
Vin
85°C
125°C
Notes
Notes: All specifications are typical at 25°C unless otherwise stated.
1. V7BA-06A2Ax series of modules include a sequencing feature that enables users to implement
various types of output voltage sequencing in their applications. This is accomplished via an additional
sequencing pin. When the sequencing feature is not used, tie the SEQ pin to Vin.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com