SS-39200-020 Datasheet, PDF (1/2 Pages) Bel Fuse Inc. – SS-39200 Series CAT6a Shielded Plugs

CAT6a Shielded Plugs
SS-39200 Series CAT6a Shielded Plugs
Features / Benefits
• Ideal for creating superior high performance CAT6a patch cables in 10Gigabit Ethernet
applications where high density routers and switches are employed
• Mechanical design features wire aligner and management bar combo to guarantee consistent
twisted pair orientation during plug assembly
• Meets CAT6a performance requirements per ANSI/TIA-568-B.2-10 and IEC 60603-7-51
• Robust shield termination and strain relief allow for one-step termination process
• Optional slim line boot features integrated strain relief and latch protection
• Selectively plated contacts with 50 micro-inches (0.76 um) of gold
• UL 94-V0 plastic components
• RoHS compliant
Part Number
SS-39200-020
Boot
Black
Cable Diameter Range
.220” - .240”
[5.59mm - 6.10mm]
SS-39200-021 Boot not included
.220” - .240”
[5.59mm - 6.10mm]
Bel Stewart Connector GmbH
Industriestrasse 20
61381 Friedrichsdorf
Germany
Tel [phone]
www.belstewart.com
Bel Stewart Connector
11118 Susquehanna Trail South
Glen Rock, PA 17327 USA
Tel [phone]
Fax [phone]
www.belstewart.com
SS-39200-022
Black
SS-39200-023 Boot not included
.230” - .250”
[5.84mm - 6.35mm]
.230” - .250”
[5.84mm - 6.35mm]
Bel Stewart’s SS-39200 Series of shielded plugs is
designed for use on CAT6a patch cables in premise
wiring systems. Engineered to meet the 500 MHz
requirements of CAT6a specifications, the SS-39200
plugs offer robust shield terminations and strain relief which allow for a one-step termination process and provide a 360°
connection between the cable shield and plug shield. The SS-39200 Series' high performance is achieved through an
innovative mechanical design featuring a wire aligner and management bar combination that guarantees consistent
twisted pair orientation during plug assembly. The wire aligner includes a patent-pending "cross talk zone" where a
precise amount of cross talk is introduced to the plug allowing for centered near end cross talk (NEXT) performance on
pairs 3,6 - 4,5 according to ANSI/TIA-568-B.2-10 and IEC 60603-7-51 standards. This wire aligner feature also provides
the cable assembler with a visual and mechanical means for building consistent assemblies capable of delivering CAT6a
performance. As a result, operator efficiency in building patch cables improves immediately and over the long term, and
productivity is much higher than with typical CAT6 or CAT6a plug assemblies. For increased space efficiency, the boot
design of the plug does not increase the overall width, making the SS-39200 Series ideal for use in high-density routers
and switches.
Document part number LIT-CAT6A-Plugs. ©2010 Bel Stewart Connector Specifications subject to change without notice. 10.10