SRBC-16F2AX Datasheet, PDF (1/7 Pages) Bel Fuse Inc. – NON-ISOLATED DC/DC CONVERTERS 2.4 V-5.5 V Input 0.75 V-3.63 V/16 A Output

NON-ISOLATED DC/DC CONVERTERS
2.4 V-5.5 V Input 0.75 V-3.63 V/16 A Output
SRBC-16F2Ax Series
• Non-Isolated
• High Efficiency
• High Power Density
• Fixed Frequency (300 kHz)
• OCP/SCP
• Flexible Output Voltage
Sequencing
• Remote On/Off
RoHS Compliant
• Under-voltage Lockout (UVLO)
• Over Temperature Protection
• Wide Input Range
• Wide Trim Range
• Remote Sense
• Converter can sink and source
current
• Active Low/High (option)
Description
The Bel SRBC-16F2Ax modules are a series of non-isolated dc/dc converters that deliver up to 16 A of output
current with full load efficiency of 94% at 3.3 V output. These modules provide precisely regulated voltage
programmable via external resistor from 0.75 V to 3.63 V over a wide range of input voltage (2.4-5.5 V). These
modules have a sequencing feature that enables designers to implement various types of output voltage
sequencing when powering multiple voltages on a board. The open-frame construction and small footprint
enable designers to develop cost and space-efficient solutions. Standard features include remote On/Off,
remote sense, over current protection, short current protection, wide input, and programmable output voltage.
Part Selection
Output
Voltage
Input
Voltage
0.75 V-3.63 V¹ 2.4 V-5.5 V
Max.
Output
Current
16 A
Max.
Output
Power
58.1 W
Typical
Efficiency
94%
Model
Number
Active Low
SRBC-16F2AL
Model
Number
Active High
SRBC-16F2A0
Model
Number
Active Low
SRBC-16F2AW²
Notes: 1. These modules use a buck topology, so the output voltages must be 0.8 V less than the input voltage.
2. “W” indicates special coating.
3. Add “G” to the end of the Model Number to indicate Tray Packaging.
Absolute Maximum Ratings
Parameter
Min
Typ
Input Voltage (continuous)
-0.3 V
-
Output Enable Terminal Voltage
-0.3 V
-
Sequencing Voltage ¹
-0.3 V
-
Ambient Temperature
-40 °C
-
Storage Temperature
-55 °C
-
Max
5.8 V
5.8 V
Vin
85 °C
125 °C
Notes
Notes: All specifications are typical at 25 °C unless otherwise stated.
1. SRBC-16F2Ax series of modules include a sequencing feature that enables users to implement
various types of output voltage sequencing in their applications. This is accomplished via an additional
sequencing pin. When the sequencing feature is not used, tie the SEQ pin to Vin.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com