SRBC-10F1AX Datasheet, PDF (1/12 Pages) Bel Fuse Inc. – NON-ISOLATED DC/DC CONVERTERS

NON-ISOLATED DC/DC CONVERTERS
2.4 Vdc - 5.5 Vdc Input 0.75 Vdc - 3.63 Vdc/10 A Output
SRBC-10F1Ax
RoHS Compliant
Rev.A
• Non-Isolated
• High Efficiency
• High Power Density
• Fixed Frequency (300 kHz)
• Remote On/Off
• Converter Can Sink and Source
Current
• Under-voltage Lockout (UVLO)
• Over Temperature Protection
• OCP/SCP
• Wide Input
• Wide Trim
• Remote Sense
• Active Low/High (Option)
Description
The Bel SRBC-10F1Ax modules are a series of non-isolated dc/dc converters that deliver up to 10 A of output
current with full load efficiency of 95% at 3.3 Vdc output. These modules provide precisely regulated voltage
programmable via external resistor from 0.75 Vdc to 3.63 Vdc over a wide range of input voltage. The open-
frame construction and small footprint enable designers to develop cost and space-efficient solutions. Standard
features include remote On/Off, over current protection, short current protection, wide input, and programmable
output voltage.
Part Selection
Output
Voltage
Input
Voltage
0.75 V - 3.63 V¹ 2.4 V - 5.5 V
Max. Output
Current
10 A
Max. Output
Power
36 W
Typical
Efficiency
95%
Model Number
Active Low
SRBC-10F1AL
Model Number
Active High
SRBC-10F1A0
Notes: 1. These modules use a buck topology, so the output voltages must be 0.5 V less than the input voltage.
2. Add “G” to the end of the Model Number to indicate Tray Packaging.
3. All part numbers above indicate RoHS 6. Change the second letter "R" to "7" for RoHS 5 part numbers.
Absolute Maximum Ratings
Parameter
Min
Typ
Input Voltage (continuous)
-0.3 V
-
Max
5.8 V
Output Enable Terminal Voltage
-0.3 V
-
5.8 V
Ambient Temperature
-40 °C
-
85 °C
Storage Temperature
-55 °C
-
125 °C
Note: All specifications are typical at 25 °C unless otherwise stated.
Notes
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com