SRBA-06F1AX Datasheet, PDF (1/6 Pages) Bel Fuse Inc. – NON-ISOLATED DC/DC CONVERTERS 2.4 V-5.5 V Input 0.75 V-3.63 V/6 A Output

NON-ISOLATED DC/DC CONVERTERS
2.4 V-5.5 V Input 0.75 V-3.63 V/6 A Output
SRBA-06F1Ax Series
• Non-Isolated
• High Efficiency
• High Power Density
• Fixed Frequency (300 kHz)
• Converter Can Sink and Source
Current
RoHS Compliant
• Under-voltage Lockout (UVLO)
• Wide Trim
• OCP/SCP
• Remote On/Off
• Active Low/High (option)
Description
The Bel SRBA-06F1Ax modules are a series of non-isolated dc/dc converters that deliver up to 6A of output
current with full load efficiency of 93% at 3.3 V output. These modules provide precisely regulated voltage
programmable via external resistor from 0.75 V to 3.63 V over a wide range of input voltage (2.4 V-5.5 V). The
open-frame construction and small footprint enable designers to develop cost and space-efficient solutions.
Standard features include remote On/Off, over current protection, short circuit protection, wide input, and
programmable output voltage.
Part Selection
Output
Input
Voltage
Voltage
0.75 V - 3.63 V¹ 2.4 V - 5.5 V
Max. Output
Current
6A
Max. Output
Power
21.8 W
Typical
Efficiency
93%
Model Number
Active Low
SRBA-06F1AL
Model Number
Active High
SRBA-06F1A0
Notes: 1. These modules use a buck topology, so the output voltages must be 0.5 V less than the input voltage.
2. Add “G” to the end of the Model Number to indicate Tray Packaging.
Absolute Maximum Ratings
Parameter
Min
Typ
Input Voltage (continuous)
-0.3 V
-
Output Enable Terminal Voltage
-0.3 V
-
Ambient Temperature
-40 °C
-
Storage Temperature
-55 °C
-
Max
5.8 V
5.5 V
85 °C
125 °C
Note: All specifications are typical at 25 °C unless otherwise stated.
Notes
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com