English
Language : 

SFP-1GBT-04 Datasheet, PDF (1/4 Pages) Bel Fuse Inc. – 10/100 BroadR-Reach™ RJ45 SFP Module
10/100 BroadR-Reach™ RJ45 SFP Module
SFP-1GBT-04
FEATURES / BENEFITS
• Design based on Broadcom’s BroadR-Reach™ technology,
using their BCM54810S IC
(login at https://support.broadcom.com/Core/Login.aspx for
IC support)
• Complies with IEEE 802.3ab and Multi-Source Agreement
(MSA) specifications for SFP transceivers
• Supports IEEE 802.3u and IEEE 802.3ab auto–negotiation
features to allow networking equipment to automatically
determine and adjust the required settings
• Operates in extended temperature range of -40°­ to +85° C
• Automatically compensates for baseline wander by removing
the DC offset from the input signal
• Low EMI emissions
• Automatic dependent interface (DI) crossover, eliminating
the need for crossover cables or cross-wire (MDIX) ports
• Bail latch provides ease of extraction
Part Number
Description
• Compact RJ45 connector assembly
• Data scrambled to reduce radiated emission
SFP-1GBT-04
SGMII to 10/100Base-T SFP
BroadR-Reach™ Mode
• Power consumption is 340mW typical
• Fully RoHS compliant
• The BCM54810S physical layer IC (PHY) can be accessed via I2C interface:
PHY address = “ACh”
EPROM address = “A0h”
The Bel SFP-1GBT-04 module is internally configured for copper 10/100 BroadR-Reach™ mode. The host interface
transmits and receives serial data differentially at 1.25 Gbps.
• SFP Transceiver identification is specified as “04h” for byte 6 in the EEPROM.
REGULATORY AND STANDARDS COMPLIANCE
APPLICATIONS
• Compliant with IEEE 802.3
• FCC Part 15, Class A
• 10/100 Mbps data rate with an extended reach
of 300 to 500 meters when using high quality
Category 5/5e cable
• EN55022 Class A (CISPR 22 Class A)
• Industrial temperature environments -40°­ to +85° C
• Meets requirements of relevant European Directives (CE)
• Networking equipment
• E55024 Immunity standard and NEBS 3 ESD
• Switches-to-switches interface
• Routers
©2011 Bel Fuse Inc. Specifications subject to change without notice. 04.29.11
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
page 1