SFP-1GBT-03_12 Datasheet, PDF (1/5 Pages) Bel Fuse Inc. – SFP Copper Transceiver 10/100/1000Base-T SGMII

SFP Copper Transceiver 10/100/1000Base-T SGMII
SFP-1GBT-03
FEATURES / BENEFITS
• Designed with Broadcom’s BCM54616S chipset
(login at https://support.broadcom.com/Core/Login.aspx
for IC support)
• Complies with IEEE 802.3, 802.3u, and 802.3ab
specifications
• Conforms to Multi-Source Agreement (MSA) specifications
for SFP transceivers
• Supports IEEE 802.3u and IEEE 802.3ab auto–negotiation
features to allow networking equipment to automatically
determine and adjust the required settings
• Automatically compensates for baseline wander by
removing the DC offset from the input signal
• Assembled with low EMI emissions IC and fully metallic
housings
• Automatic dependent interface (DI) crossover, eliminating
the need for crossover cables or cross-wire (MDIX) ports
• Bail latch provides ease of extraction
APPLICATIONS
• 10/100/1000 Mbps data rate in excess of
100 meters of Category 5/5e cable
• Compact RJ45 connector assembly
• Networking equipment
• Data is scrambled to reduce radiated emission
• Switch-to-switch interface
• Power consumption is 610mW typical for 1000Base-T
• Routers
• Power consumption is 320mW typical for 10/100Base-T
• Fully RoHS compliant
• The BCM54616S physical layer IC (PHY) can be accessed via I²C interface:
• PHY address = “ACh”
• EEPROM address = “A0h”
The Bel SFP-1GBT-03 transceiver is an internally configured 10/100/1000Base-T SFP that requires the host system to
provide SGMII interface. The PHY interfaces directly with SerDes interface. The host interface transmits and receives serial
data differentially at 1.25 Gbps. The copper interface is full featured as advertised full/half duplex and 1000Base-T wire
speed.
• SFP Transceiver identification is specified as “08h” for byte 6 in the EEPROM.
REGULATORY AND STANDARDS COMPLIANCE
• Compliant with IEEE 802.3:2000
• FCC Part 15, Class A
• EN55022 Class A (CISPR 22 Class A)
• CE
• E55024 Immunity standard and NEBS 3 ESD
©2012 Bel Fuse Inc. Specifications subject to change without notice. 01.19.12
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com
page 1