S560-6611-19 Datasheet, PDF (1/2 Pages) Bel Fuse Inc. – ADSL Magnetics Fujitsu

ADSL Magnetics
Fujitsu
TM01358
• Designed to comply with the requirements of GR1089, • Operating and storage temperature range: -40° to +85° C
UL1950, EN60950, BABT and CSA950 to provide a
supplementary insulation barrier with a working voltage • Meets IEC 695, 2-2 flammability requirements
of 250V
• PWB Process Capability: standard printed wiring board
• UL File Number E150991
assembly techniques, total-immersion cleaning
• Minimum interwinding breakdown voltage of 1500 Vrms • Reliability testing: shock, vibration, temperature cycling,
temperature - humidity - bias
ELECTRICAL SPECIFICATIONS AT 25° C
Part Number
S560-6611-19
Turns Ratio
±2%
Chip : Line
1:1
Inductance¹
µH ±10%
Line Side
500
Leakage
Inductance³
µH max
DCR
Ω
max
Harmonic
Distortion²
dB max
Line Side
Chip Side Line Side
30 kHz +10 dBm on
100 Ω load on Line Side
4
4.4
4.4
75
All measurements are made with pins 2 and 3 connected and pins 6 and 7 connected
1. Inductance measured at 10 kHz, 0.1 Vac load on line side
2. Measurements made with 100Ω source and 100Ω load impedance
3. Leakage inductance measured at 100 kHz, 0.1 Vac
SCHEMATIC
S560-6611-19
8
1
6
Chip
7
3
Line
2
5
4
©2001 Bel Fuse Inc. Specifications subject to change without notice. 08.01
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com
page 1