S560-6600-L3 Datasheet, PDF (1/2 Pages) Bel Fuse Inc. – ADSL MAGNETICS GlobeSpan

ADSL MAGNETICS
GlobeSpan
TM01337
• Designed to comply with the requirements of UL1950
and EN60950 to provide a supplementary insulation
barrier with a working voltage of 250V
• Operating and storage temperature range -40° to +85°C
• Meets IEC 695, 2-2 flammability requirements
• UL File Number E150991
• PWB Process Capability: standard printed wiring board
assembly techniques, total-immersion cleaning
• Minimum interwinding breakdown voltage of 1500 Vrms
• Reliability testing: shock, vibration, temperature cycling,
temperature - humidity - bias
ELECTRICAL SPECIFICATIONS at 25° C
Part Number
Turns Ratio
±2%
(1-5) : (10-6)
Inductance¹
µH ±5%
(10-6)
Leakage
Inductance²
µH max
DCR
Ω
max
(10-6)
(1-4) & (2-5) (10-7) & (9-6)
Longitudinal
Balance⁴
dB max
20kHz -
500kHz
Insertion
Loss⁴
dB max
100kHz
Frequency
Response⁴
dB max
40kHz -
500kHz
Harmonic
Distortion⁴
dB max
100kHz
S560-6600-L3
1:2
470
10
0.50
1.25
-55
0.50
±0.30
-80
1. Inductance measured at 10 kHz, 0.1Vac . Connect terminals 7 to 9.
2. Leakage inductance measured at 100 kHz, 0.1 Vac. Connect terminals 2 to 4 and 7 to 9. Short terminals 1, 2, 4 and 5.
3. Interwinding capacitance measured at 1 kHz, 1 Vac.
4. Measurements made with 100 Ω source and 25Ω load impedance.
5. DCR requirements are for each winding.
SCHEMATIC
S560-6600-L3
1
10
4
Chip Side
2
7
Line Side
9
5
6
©2001 Bel Fuse Inc. Specifications subject to change without notice. 05.01
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com
page 1