S560-6600-HG Datasheet, PDF (1/2 Pages) Bel Fuse Inc. – G.SHDSL Magnetics

G.SHDSL Magnetics
TM02307
• Designed to comply with the requirements of UL1950
and EN60950 to provide an insulation barrier with a
working voltage of 150V
• Operating and storage temperature range: -40° to +85° C
• Meets IEC 695, 2-2 flammability requirements
• Minimum interwinding breakdown voltage of 1500 Vrms • PWB Process Capability: standard printed wiring board
assembly techniques, total-immersion cleaning
• Minimum interwinding voltage of 600 Vrms between pins
1 and 2 for one minute for power cross requirement
• Reliability testing: shock, vibration, temperature cycling,
temperature - humidity - bias
ELECTRICAL SPECIFICATIONS AT 25° C
Part Number
Turns Ratio
±2%
Inductance¹
mH ±7%
Leakage
Inductance²
µH max
Chip : Line Line Side
Line Side
DCR
Ω
max
Longitudinal
Balance³
dB max
Chip Side Line Side
20 kHz -
500 kHz
Insertion
Loss
dB max
100 kHz
S560-6600-HG 1 : 0.70
3.18
15
24
7.9
-45
1.5
Harmonic
Distortion³
dB max
2 Vrms
5 kHz
-82
All measurements are made with pins 2 and 3 connected and pins 5 and 7 connected
1. Inductance measured at 10 kHz, 0.1 Vac
2. Measured at 100 kHz, 0.1 Vac
3. Measured with line impedance of 135 Ω and chip impedance of 275.5 Ω
SCHEMATIC
S560-6600-HG
8
1
5
IC
7
3
Line
2
6
4
©2002 Bel Fuse Inc. Specifications subject to change without notice. 10.02
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com
page 1