S560-6600-GK Datasheet, PDF (1/2 Pages) Bel Fuse Inc. – HDSL & G.SHDSL Magnetics GlobespanVirata

HDSL & G.SHDSL Magnetics
GlobespanVirata
TM02308
• Designed for G2237 DSP and 3137 AFE
• Operating and storage temperature range: -40° to +85° C
• Designed to comply with the requirements of GR1089 • Meets IEC 695, 2-2 flammability requirements
power fault, UL1950 and EN60950 to provide an
insulation barrier with a working voltage of 250V
• PWB Process Capability: standard printed wiring board
assembly techniques, total-immersion cleaning
• Minimum interwinding breakdown voltage of 1500 Vrms
• Reliability testing: shock, vibration, temperature cycling,
• Minimum interwinding breakdown voltage of 600 Vrms
temperature - humidity - bias
between line center tap or pin 1 and 2
ELECTRICAL SPECIFICATIONS AT 25° C
Part Number
Turns Ratio
±2%
Chip : Line
Inductance¹
mH ±5%
Leakage
Inductance²
µH max
Line Side
Line Side
DCR
Ω
max
Longitudinal
Balance³
dB max
Chip Side Line Side
20 kHz -
300 kHz
Insertion
Loss
dB max
100 kHz
S560-6600-GK
1:4
2
10
0.45
2.6
-55
0.5
Harmonic
Distortion³
dB max
2 Vrms
5 kHz
-80
All measurements are made with pins 2 and 4 connected
1. Inductance measured at 10 kHz, 0.1 Vac
2. Measured at 100 kHz, 0.1 Vac
3. Measured with line impedance of 135 Ω and chip impedance of 8.4 Ω
SCHEMATIC
S560-6600-GK
1
9
Chip 8
7
4
Line
2
5
©2002 Bel Fuse Inc. Specifications subject to change without notice. 11.02
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com
page 1