S560-6600-FW Datasheet, PDF (1/2 Pages) Bel Fuse Inc. – ADSL Magnetics

ADSL Magnetics
TM02397
• Designed to comply with the requirements of UL1950
and EN60950 to provide a supplementary insulation
barrier with a working voltage of 250V
• Operating and storage temperature range: -40° to +85° C
• Meets IEC 695, 2-2 flammability requirements
• Minimum interwinding breakdown voltage of 1500 Vrms • PWB Process Capability: standard printed wiring board
assembly techniques, total-immersion cleaning
• Minimum interwinding breakdown voltage of 600 Vrms
between pin 9 and 10 for 1 minute
• Reliability testing: shock, vibration, temperature cycling,
temperature - humidity - bias
ELECTRICAL SPECIFICATIONS AT 25° C
Part Number
Turns Ratio
±2%
Inductance¹
µH ±5%
Leakage
Inductance²
µH max
DCR
Ω
max
Chip : Line Line Side
Line Side
Chip
Side
Line
Side
Longitudinal
Balance³
dB max
40 kHz -
500 kHz
Insertion
Loss³
dB max
100 kHz
Frequency
Response³
±dB
Harmonic
Distortion³
dB max
40 kHz -
500 kHz
12 Vpp
100 kHz
S560-6600-FW
1 : 1.6
440
11.5
1.8
3.0
-55
0.5
0.3
-90
All measurements are made with pins 2 and 4 connected and pins 1 and 9 connected
1. Inductance measured at 10 kHz, 0.1 Vac
2. Measured at 100 kHz, 0.1 Vac
3. Measured with line impedance of 100 Ω and chip impedance of 39 Ω
SCHEMATIC
S560-6600-FW
1
10
4
Chip
2
7
Line
9
5
6
©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com
page 1