S560-6600-DT Datasheet, PDF (1/2 Pages) Bel Fuse Inc. – ADSL Magnetics

ADSL Magnetics
TM02395
• Designed to comply with the requirements of UL1950 • Meets IEC 695, 2-2 flammability requirements
and EN60950 to provide the supplementary insulation
barrier with a working voltage of 250V
• PWB Process Capability: standard printed wiring board
assembly techniques, total-immersion cleaning
• Minimum interwinding breakdown voltage of 1500 Vrms
• Reliability testing: shock, vibration, temperature cycling,
• Operating and storage temperature range: -40° to +85° C temperature - humidity - bias
ELECTRICAL SPECIFICATIONS AT 25° C
Part Number
Turns Ratio
±2%
Chip : Line
Inductance¹
µH ±5%
Leakage
Inductance²
µH max
Line Side
Chip Side
Interwinding
Capacitance³
pF max
DCR
Ω
max
Chip : Line
Chip Side Line Side
S560-6600-DT
1 : 1.15
475
5
50
2.2
2
Longitudinal
Balance⁴
dB min
20 kHz -
1.1 MHz
45
Part Number
Insertion
Loss⁴
dB max
150 kHz - 300 kHz
S560-6600-DT
0.5
Insertion
Loss⁴
dB max
1.0 MHz
1.0
Harmonic
Distortion⁴
dB max
12 Vpp
150 kHz
-85
DC Unbalance
Current
mA max
Chip : Shorted Line
2
All measurements are made with pins 2 and 3 connected and pins 5 and 7 connected
1. Inductance measured at 10 kHz, 0.1 Vac
2. Measured at 100 kHz, 0.1 Vac
3. Interwinding capacitance measured at 10 kHz, 0.1 Vac
4. Measured with line impedance of 100 Ω and chip impedance of 75.6 Ω
SCHEMATIC
S560-6600-DT
1
8
3
Line
2
5
Chip
7
4
6
©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com
page 1