S560-6600-DJ Datasheet, PDF (1/2 Pages) Bel Fuse Inc. – SHDSL, HDSL2 & HDSL4 Magnetics GlobespanVirata G2237

SHDSL, HDSL2 & HDSL4 Magnetics
GlobespanVirata G2237
TM02394
• Designed to comply with the requirements of GR1089
Power Fault, UL1950 and EN60950 supplementary
insulation with 250 VAC working voltage
• Operating and storage temperature range: -40° to +85° C
• Meets IEC 695, 2-2 flammability requirements
• UL file number E169987, BABT certificate number
NC011559, CB certificate number 14210
• PWB Process Capability: standard printed wiring board
assembly techniques, total-immersion cleaning
• Minimum interwinding breakdown voltage of 1500 Vrms • Reliability testing: shock, vibration, temperature cycling,
for 1 minute between line and chip
temperature - humidity - bias
• Minimum interwinding breakdown voltage of 600 Vrms • All specifcations must be met for any DC unbalance
for 1 minute between line center tap or pin 1 and 2
current up to 100mA max in the line side
ELECTRICAL SPECIFICATIONS AT 25° C
Part Number
Turns
Ratio
±2%
Inductance¹
mH ±6%
Leakage
Inductance²
µH max
DCR
Ω
max
Interwinding
Capacitance³
pF max
Longitudinal
Balance⁴
dB max
Insertion
Loss⁴
dB max
Return
Loss⁴
dB min
IC : Line
(1-5)
(1-5)
IC Line
Side Side
IC : Line
DC -
500kHz
100kHz
40kHz -
500kHz
Harmonic
Distortion⁴
dB max
4 Vrms
5kHz
S560-6600-DJ
1 : 5.4
3
15
0.35 3.8
160
-55
0.50
15
79
All measurements are made with pins 2 and 4 connected except for breakdown voltage between pin 1 and 2
1. Inductance measured at 10 kHz, 0.1 Vac
2. Leakage inductance measured at 100 kHz, 0.1 Vac
3. Interwinding capacitance measured at 10 kHz, 1.0 Vac
4. Measured with line impedance of 135 Ω and chip impedance of 4.6 Ω
SCHEMATIC
S560-6600-DJ
1
9
4
IC
Line
2
7
5
©2004 Bel Fuse Inc. Specifications subject to change without notice. 01.04
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com
page 1