MRJ21 Datasheet, PDF (1/2 Pages) Bel Fuse Inc. – Cable Assemblies

MRJ21 Cable Assemblies
RoHS
Compliant
MRJ21 cable assemblies showing connector options:MRJ21 180 degree straight and 45
degree angle connectors as well as multiple RJ45 connectors
Features & Benefits
• Suitable for Gigabit Ethernet, PoE and VoIP
• High density telco-style, double-blade design allows 1.5 to 3 times the
density of 2x6 modular stacked RJ45 jacks.
• 1mm pair spacing, 1.5 mm pair-to-pair spacing
• Designed to meet or exceed CAT5e performance standards
• Available in both unshielded or low EMI shielded configurations
• Durability tested to 500 cycles – see www.belfuse.com for data sheet(s)
Part Number*
Description
Cable Type
Shielding
MRJxxxxAF-A
6 RJ45 Plugs to MRJ21 Angled
CMR
Unshielded
MRJxxxxDD-A MRJ21 Straight to MRJ21 Straight
CMR
Unshielded
MRJxxxxAD-A
6 RJ45 Plugs to MRJ21 Straight
CMR
Unshielded
MRJxxxxDF-A
MRJ21 Straight to MRJ21 Angled
CMR
Unshielded
MRJxxxxAF-C
6 RJ45 Plugs to MRJ21 Angled
CMP
Unshielded
MRJxxxxDD-C MRJ21 Straight to MRJ21 Straight
CMP
Unshielded
MRJxxxxAD-C
6 RJ45 Plugs to MRJ21 Straight
CMP
Unshielded
MRJxxxxDF-C
MRJ21 Straight to MRJ21 Angled
CMP
Unshielded
* xxxx denotes desired cable length from 0.5 to 100.0 meters, in 0.5 meter increments.
Typical part numbers are listed.For configurations not shown here, please consult factory.
Bel Stewart Connector’s MRJ21 cable assembly products are designed to support increased patch panel density in
telecom and premise wiring applications. This modular cabling platform supports network applications such as Gigabit Ethernet, Voice
over Internet Protocol (VoIP), and Power over Ethernet (PoE). Cable connection options include left or right 45 degree angle, or 180
degree straight cable exit to facilitate various routing schemes to component racks. In addition, these cable assemblies allow a connection
migration path from legacy products including punch down blocks, modular plug breakouts, and standard RJ21 to MRJ21 assemblies.
Designed with a die cast backshell for shielded applications, Bel Stewart’s MRJ21 cable assemblies are durability tested to 500 cycles to
ensure unsurpassed quality and performance. Jackscrews provide a secure cable connection while the robust boardlock design allows superior
PCB strain relief. For additional product information visit our Ethernet connectivity webpage at www.belstewart.com
MRJ21 is a trademark owned by TE Connectivity used here under license.
11118 Susquehanna Trail South Glen Rock, PA 17327Tel: [phone]Fax: [phone]
Document number US/LIT-MRJ21v08.12 @2012 Bel connector Inc.
Specification Subject To Change