GRNC-C2A160 Datasheet, PDF (1/4 Pages) Bel Fuse Inc. – NON-ISOLATED DC/DC CONVERTERS

NON-ISOLATED DC/DC CONVERTERS
10.3 V - 13.2 V Input / Programmable Output / 120 A VRM 10.1
Compatible
Sep.1, 2011
Bel Power Inc., a subsidiary of Bel Fuse Inc.
GRNC-C2A160 RoHS Compliant PRELIMINARY Rev.B
 High efficiency means less power dissipation
 Remote on/off
 Wide input range (10.3 V - 13.2 V)
 Wider input range available – consult factory
 2-Wire Remote sense
 6 bit VID digital voltage programming.
 Class2,Category2,Non- Non-Isolated DC/DC Converter (refer to
IPC-9592)
Description
The GRNC-C2A Series is a non-isolated step down dc/dc converter providing up to 120 A of output current and
designed to be compatible to the Intel VRM 10.1 specification. Standard features include current monitor,
remote on/off, over current protection, remote sense and a power good signal. This product also makes use of
adaptive positioning to improve transient response performance. These products may be used almost
anywhere low-voltage silicon is being employed and a nominal 12 Vdc source is available. Typical applications
include file servers, work stations and other computing applications.
Part Selection
Output Voltage Input Voltage
0.83 V - 1.6 V
12 V
Output Current
(Thermal Design)
105 A
Output Current
(Peak Current)
120 A
Typical
Efficiency
82%
Model Number
G7NC-C2A160
Input Specifications
Parameter
Input Voltage Range
Input Current (disabled)
Input Current (full load)
Reflected Ripple Current
Min
10.3 V
-
-
-
Typ
-
17 mA
-
-
Max
13.2 V
-
23 A
400 mA
Notes
With 2 330 uF, 25 mOhm capacitor and
200 nH of input inductance.
Output Specifications
Parameter
Output Current
Set Point Accuracy
Adaptive Positioning
(Droop Impedance)
Ripple and Noise
Turn on Time
Transient Response
Deviation
Settling Time
Remote Sense Compensation
Output Capacitance
Min
0A
-
1.27 V
-
-
-
-
-
-
-
Typ
-
-
1.28 V
1.25 mOhm
20 mV
8 mS
90mV
100mV
-
8290 uF
Max
105 A
120 A
1.29 V
-
-
16 mS
-
-
±0.3 Vdc
-
Notes
Thermal design
Peak current rating
no load, excluding Adaptive positioning,
VID 101101
pk-pk,0 to 20MHz Bandwidth full load.
Note 3
di/dt = 5 A/uS
Load step =50% of max load.
Consult factory for applications with
external capacitance outside of this
range
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302  Tel [phone]  Fax [phone]  www.belfuse.com