|
GAQW3V330 Datasheet, PDF (1/8 Pages) Galaxy Power, Inc. – 48V Input, 3.3VDC, 30A Output | |||
|
AQUARIUS DC/DC CONVERTERS
48V Input â 3.3VDC â 30A Output
GAQW3V330 â 1/8 Brick Aquarius Series
POWER PRODUCTS
GAQW3V330
⢠Industry standard pinout and footprint
⢠No heat sink required
⢠High efficiency: 91% at 3.3V, 30A
91% at 3.3V, 15A
⢠Very low common-mode noise for a
commercial DC/DC converter
⢠Two-stage input filter
⢠Constant switching frequency
⢠Remote sense
⢠Single board design
⢠Very low parts count
Typical Characteristics
⢠Output setpoint accuracy: ± 1%
⢠Load regulation: ± 0.2%
⢠Line regulation: ± 0.2%
⢠Regulation over line, load, and temperature: ± 2%
⢠Low output ripple
⢠Output trim
Control Functions
⢠Uses patented power supply control and architecture
⢠Microprocessor controlled
⢠Primary-side enable, choice of logic
Protection Features
⢠Over temperature protection
⢠Over voltage protection
⢠Over current protection
⢠Over/Under input voltage protection
Ordering Information
Standard Model
Number
GAQW3V330*
Input
Voltage
48V
Output
Voltage
3.3V
Max
Current
30A
* Options:
P = Positive Logic Version;
High = On
E = 0.18" Pins (± .01")
M = 0.145" Pins (± .01")
S = 0.12" Pins (± .01")
T = Tuned model**
** T (Tuned Model) Option
Designed for higher di/dt and âl
applications, the transient response
has been modified to take advantage
of the capacitance on the customerâs
PCB. This unit requires a minimum
load capacitance of 5600µF with an
impedance magnitude of less than
0.005Ω at 15kHz. It offers a minmum
3X improvement in the peak response
compared to a standard unit.
Example Part Number:
(All options)
GAQW3V330 P S T
Part Number
Options:
Positive Logic Version
Optional Pin Lengths
E = 0.18"
M = 0.145"
S = 0.12"
Tuned Model
©2006 Bel Fuse Inc. Specifications subject to change without notice. 11.06
Bel Power Inc. 155 Flanders Road, Westborough, MA 01581 ⢠Tel 508-870-9775 ⢠Fax 508-870-9796 ⢠www.belpower.com
page 1
|
▷ |