|
GALW9V647 Datasheet, PDF (1/8 Pages) Bel Fuse Inc. – SIRIUS DC/DC CONVERTER | |||
|
SIRIUS DC/DC CONVERTER
48V Input â 9.6VDC â 47A Output
GALW9V647 â 1/4 Brick Sirius
⢠High efficiency: 93.5% at 9.6V, 47A
94.5% at 9.6V, 23.5A
⢠Very low common-mode noise for a
commercial DC/DC converter
⢠Two-stage input filter
⢠Constant switching frequency
⢠Single board design, very low parts count
⢠âStretchedâ quarter-brick 1.45" x 4.25" x 0.95"
including integrated heat sink
POWER PRODUCTS
GALW9V647
Typical Characteristics
⢠Output setpoint accuracy: ± 5%
⢠Load regulation: ± 2%
⢠Line regulation: ± 0.2%
⢠Regulation over line, load, and temperature: ± 10%
⢠Low output ripple
⢠Output trim
Control Functions
⢠Uses patented power supply control and architecture
⢠Microprocessor controlled
⢠Primary-side enable, choice of logic
Protection Features
⢠Over temperature protection
⢠Over voltage protection
⢠Over current protection
⢠Over/Under input voltage protection
Ordering Information
Standard Model
Number
GALW9V647*
Input
Voltage
48V
Output
Voltage
9.6V
Max
Current
47A
* Options:
E = 0.18" Pins (± .01")
Note: Standard unit is positive logic and
requires 2000µF of output load
capacitance for stability.
Example Part Number:
(All options)
GALW9V647 E
Part Number
Options:
Pin Length
E = 0.18"
©2008 Bel Fuse Inc. Specifications subject to change without notice. 07.08
Bel Power Inc. 155 Flanders Road, Westborough, MA 01581 ⢠Tel 508-870-9775 ⢠Fax 508-870-9796 ⢠www.belpower.com
page 1
|
▷ |