English
Language : 

G7NA-30D180 Datasheet, PDF (1/2 Pages) Bel Fuse Inc. – NON-ISOLATED DC/DC CONVERTERS 3 - 15V Input / Programmable Output / 30A VRM 8.5 Compatible
NON-ISOLATED DC/DC CONVERTERS
3 - 15V Input / Programmable Output / 30A VRM 8.5 Compatible
G7NA-30D180
• High efficiency means less power dissipation
• Remote on/off
• Ultrawide input range (3V - 15V)
• Very wide trim range (-100%, +200%)
• 2-Wire Remote sense
• 5 bit VID digital voltage programming.
• Single wire current sharing
Description
The G7NA-30D Series is a non-isolated step down DC/DC converters providing up to 30A of output current and
designed to be compatible to the Intel VRM8.5 specification. Standard features include current share, remote
on/off, over current protection, remote sense and a power good signal. Optional features include adjustable
undervoltage lockout, output current monitor and output trim. This product also makes use of adaptive
positioning to improve transient response performance. These products may be used almost anywhere low-
voltage silicon is being employed and a nominal 12V, 5V or 3.3V source is available. Typical applications
include file servers, routers, and other computing and communications equipment.
Input Specifications
Parameter
Input Voltage Range
Input Current (disabled)
Input Current (full load)
Reflected Ripple Current
Min
3 VDC
Typ
17mA
Max
15 VDC
22A
200mA rms
Notes
With 100uF, 25mOhm
capacitor and 200nH of input
inductance.
Output Specifications
Parameter
Voltage Adjustability
Output Current
Set Point Accuracy
Adaptive Positioning
(Droop Impedance)
Ripple and Noise
Min
-100%
0A
1.85V
Turn on Time
Transient Response
Deviation
Settling Time
Remote Sense Compensation
Output Capacitance
1800uF
Typ
1.87
3.214 mOhm
20mV
6mS
85mV
35uS
±0.3VDC
Max
+200%
30A
1.89
Notes
no load, excluding Adaptive
positioning
10mS
pk-pk, 0 to 20MHz Bandwidth
Full load with external
1800uF oscon capacitor on
output.
di/dt = 5A/uS
Load step =50% of max load.
20,000uF
For applications requiring
higher or lower output
capacitance please consult
factory.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com