English
Language : 

CIQ Datasheet, PDF (1/2 Pages) Bel Fuse Inc. – Surface Mount Fast-Acting Chip Fuse
C1QD0897
Type C1Q
Surface Mount Fast-Acting Chip Fuse
Electrical Characteristics
Testing current
100%
200%
300%
Approvals
Blow Time
Minimum
Maximum
4 Hrs.
N/A
N/A
2 sec
N/A
0.2 sec
Vßc
Safety Agency Approvals
Amp range / Volt @ I.R. ability
V Listed File No. E20624
ß Certifiied No. LR39772
1A - 3A / 125V AC @ 100A
and 63V DC @ 50A
Environmental Specification
Soldering conditions
Infrared Reflow: 260ºC, 20 sec max.
Wave Solder: 260ºC, 10 sec max. (MIL-STD-202, Method
210)
Solderability: MIL-STD-202, Method 208
Operating Temperature
-55ºC to +125ºC
Shock
MIL-STD-202, Method 213, Test Condition I
(100 G's peak for 6 milliseconds)
Vibration
MIL-STD-202, Method 201 (10-55 Hz, 0.06 inch,
total excursion)
Salt Spray
MIL-STD-202, Method 101, Test Condition B (48hrs)
Insulation Resistance
MIL-STD-202, Method 302, Test Condition A
(After Opening) 10,000 ohms minimum
Resistance to Solder Heat
MIL-STD-202, Method 210, Test Condition F
(20sec, at 260ºC)
Thermal Shock
MIL-STD-202, Method 107, Test Condition B
(-65ºC to +125ºC)
Catalog
Number
Ampere
Rating
Typical
cold
Resistance
(ohm)
Volt-drop
@100% In
(Volt) max.
Melting 12T Melting 12T
< 10 mSec @10 In
(A2 Sec) (A2 Sec)
Maximum
Power
Dissipation
(W)
C1Q 1
1.A
0.182
0.27
0.060 0.0026 0.29
C1Q 1.25 1.25A 0.138
0.24
0.082 0.0043 0.33
C1Q 1.5 1.5A 0.112
0.23
0.105 0.0063 0.38
C1Q 2
2.A
0.079
0.21
0.15
0.012
0.45
C1Q 2.5 2.5A 0.060
0.19
0.21
0.019
0.52
C1Q 3
3.A
0.045
0.18
0.29
0.032
0.61
Consult manufacture for other ratings
Physical Specification
Materials
Ceramic Substrate / Tin Plated Termination
Marking
On fuse:
none
Label on Reel:
“bel” “C1Q” “ Current Rating” “125V”, Interrupting Rating and “Vßc”
Packaging
3,000 fuses in 7 inches dia. Reel, 8mm wide tape, per EIA - 481
(equivalent IEC-286 part 3)
Mechanical Dimensions
(all in inch for reference only)
C1Q
Specifications subject to change without notice
. Bel Fuse Inc 198 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: BelFuse@compuserve.com
Internet: http://www. belfuse.com
13