APC822XX-I Datasheet, PDF (1/2 Pages) Bel Fuse Inc. – Slim Line Hybrids for Infineon T1/E1/J1 ICs

“Slim Line” Hybrids for Infineon T1/E1/J1 IC’s
APC822XX-I
FEATURES
• Supports Falc and Quad Falc Chipsets for T1/E1/J1 applications including numbers PEB2256, PEB22554 and
PEB22504
• Minimum board space requirement - ideal for multiple interface line cards
• Telcordia Technologies and FCC compliant
• UL1950. Approval pending for EN60950 / IEC60950
• APC’s “Slim Line” T1/E1/J1 hybrids have been designed to minimize the board space requirements for line interface
circuitry on the T1/E1/J1 multichannel line cards
SCHEMATIC
13
1
3
Tx
11
Vcc9
GND12
10
2
5
7
Rx
8
6
NOTE: SCHEMATIC SHOWN PROVIDES LONGITUDINAL PROTECTION. FOR METALLIC PROTECTION, CONNECT 1 - 3 (2 N/C) AND 5 - 7 (6 N/C)
MECHANICAL
Back
Side View
8.05 Max
Front
Pin 1
3.3 Max
Front
Front View
37.70 MAX
2.35
11.80
MAX
Recommended PCB Layout
Recommended
Hole Size Ø1.0
1
2.54 PITCH
IN 11 PLACES
5.08
NOTE: ALL DIMENSIONS IN MM
©2003 Bel Fuse Inc. Specifications subject to change without notice. 05.20.03
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com
Page 1