|
APC82246S Datasheet, PDF (1/3 Pages) Bel Fuse Inc. – T1/E1/J1 SMD Line Interface Hybrid for Intel Octal LIU | |||
|
T1/E1/J1 SMD Line Interface Hybrid for Intel Octal LIU
APC82246s
FEATURES
⢠Suitable for all T1/E1/J1 applications
⢠Compatible with Intel LXT 3108 Octal LIU chip
⢠Minimum board space requirements
⢠Designed for multiple interface line cards
⢠Surface mount footprint
⢠Operating temperature 0° to 70° C
⢠In order to maintain the overvoltage/overcurrent capability of the module, the recommendations for the tracking between
the Line and the Tip and Ring port of the module are as follows:
Trace width = 0.025in
1oz Copper
Trace separation between Tip and Ring 0.025 in minimum to the line part of the module
⢠Longitudinal protection circuit designed to meet FCC part 68, Telcordia GR1089 for 1st level and 2nd level lighting and
1st level power line cross events and EMC EN300 386-2 (European Standard)
⢠Approved to UL 60950 and IEC 60950 safety standards for supplementary insulation
SCHEMATIC
LINE SIDE
IC SIDE
INCLUDES: ISOLATION TRANSFORMERS, COMMON MODE CHOKE, PROTECTION COMPONENTS (LINE AND CHIP SIDE)
©2004 Bel Fuse Inc. Specifications subject to change without notice. 02.26.04
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 ⢠Tel 201-432-0463 ⢠Fax 201-432-9542 ⢠www.belfuse.com
Page 1
|
▷ |