|
APC82235 Datasheet, PDF (1/2 Pages) Bel Fuse Inc. – Slim Line Hybrid for Dallas E1 | |||
|
âSlim Lineâ Hybrid for Dallas E1
APC82235
FEATURES
⢠Supports Dallas chipset for E1 applications DS2155/Q55 LIU 3.3V IC 120 ⦠impedance
⢠Minimum board space requirement - ideal for multiple interface line cards
⢠Longitudinal protection circuit designed to meet FCC part 68 as well as Telcordia GR1089 for 1st level and 2nd level
lighting and 1st level power line cross events
⢠Approval for safety standards to IEC60950, BS EN60950 supplementary isolation 1500V, working voltage 250V
⢠âSlim Lineâ E1 hybrids have been designed to minimize the board space requirements for line interface circuitry on the
E1 multichannel line cards
SCHEMATIC
1
2
5
3
4
NOTES: TYPICAL SCHEMATIC (SELV COMPONENTS WILL VARY SUBJECT TO APPLICATION)
7 VCC
11
TX
9
10 GND
8
RX
6
©2003 Bel Fuse Inc. Specifications subject to change without notice. 09.23.03
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 ⢠Tel 201-432-0463 ⢠Fax 201-432-9542 ⢠www.belfuse.com
Page 1
|
▷ |