APC5568-3V Datasheet, PDF (1/2 Pages) Bel Fuse Inc. – ISDN S Interface Hybrid

ISDN S Interface Hybrid
APC5568-3v
ELECTRICAL SPECIFICATIONS @ 25°C
Turns Ratio
+/-5%
Primary
Inductance
mH min
Leakage
Inductance
uH max
Primary
DCR
OHMS
+/- 30%
Secondary
DCR
OHMS
+/- 30%
Choke
Inductance
per line
mH nom
DCR
per line
OHMS
1CT:2
22
5.0
2.2
2.8
0.04
0.5
NOTES:
ISOLATION PRI:SEC 1500VRMS
APPROVALS PENDING FOR IEC6950:A4:1996 AND EN60950:A4:1997
DESIGNED FOR USE WITH MOTOROLA MC145575 AND COLOGNE HFC-SXX
EXTERNAL RESISTORS R1 AND R1’ REQUIRED FOR AMPLITUDE OPTIMIZATION. RECOMMENDED VALUE 560 OHMS
MECHANICAL
5.08�
[0.2]�
20.32�
[0.8]�
5.08�
[0.2]�
38.00�
[1.49]�
20.00�
[0.78]�
18�
13�
0.50�
[0.02]� Sideelevation�
NOTES:
NOT TO SCALE
TOLERANCE+/- 0.2MM
ALL DIMENSIONS IN MM [INCHES]
DOT ON TOP SURFACE INDICATES PIN 1
0.25�
[0.01]�
Endelevation�
1�
12�
0.8�
[0.03]�
2.54[0.1]�Ty�pical�
30.48�
[1.2]�
Planview(suggestedPCBholelayout)�
©2006 Bel Fuse Inc. Specifications subject to change without notice. 08.02.06
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com
Page 1