0RX3-D2T12X Datasheet, PDF (1/6 Pages) Bel Fuse Inc. – ISOLATED DC/DC CONVERTERS

ISOLATED DC/DC CONVERTERS
48 Vdc Input 12 Vdc/18 A Output
0RX3-D2T12x RoHS Compliant Rev.C
 Isolated
 High Efficiency
 High Power Density
 Low Cost
 Fixed Frequency (300 kHz)
 Input Under-voltage Lockout
 Input Over-voltage Lockout
 Output Over-voltage Protection
 OCP/SCP
 Over Temperature Protection
 Remote On/Off
 Basic Insulation
 Baseplate
Description
The 0RX3-D2T12x is an isolated dc/dc converter that operates from a nominal 48 Vdc source. This unit will
provide up to 216 W of output power from a nominal 48 Vdc input. This unit is designed to be highly efficient and
low cost. Features include remote on/off, over current protection and over-voltage protection. The converter is
provided in an industry standard quarter brick package.
Part Selection
Output
Voltage
Input
Voltage
12 V
36 V - 75 V
Max. Output
Current
18 A
Max. Output
Power
216 W
Typical
Efficiency
95%
Model Number
Active High
0RX3-D2T120
Model Number
Active Low
0RX3-D2T12L
Notes: 1. Add “G” suffix at the end of the model number to indicate Tray Packaging.
2. All part numbers above indicate RoHS 6. Change the second letter "R" to "7" for RoHS 5 part numbers.
Absolute Maximum Ratings
Parameter
Min
Typ
Max
Notes
Input Voltage (continuous)
-0.3 V
-
80 V
Input voltage Transient Protection
-
-
100 V
Operating for 100mS
Remote On/Off
-0.3 V
-
18 V
I/O Isolation Voltage
-
-
1500 V
Ambient Temperature
-40 C
-
85 C
Storage Temperature
-55 C
-
125 C
Input Specifications
Parameter
Input Voltage
Min
36 V
Typ
48 V
Max
75 V
Notes
Input Current (full load)
-
-
7.0 A
Input Current (no load)
-
80 mA
150 mA
Remote Off Input Current
-
Input Reflected Ripple Current (pk-pk)
-
Input Reflected Ripple Current (rms)
-
I²t Inrush Current Transient
-
10 mA
20 mA
5 mA
-
20 mA
30 mA
10 mA
1 A²s
Tested with simulated source impedance
of 10 uH, 5 Hz to 20 MHz; use a 100 uF
/100 V electrolytic capacitor with ESR = 1
ohm max. at 200 kHz at 25 C.
Turn-on Voltage Threshold
-
34.5 V
35.5 V
Turn-off Voltage Threshold
32.5 V 33.5 V
-
Notes: 1. Should place at least 100uF/100V electrolytic capacitor directly adjacent to the input pin of the module.
2. All specifications are typical at nominal input, full load at 25 C unless noted.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302  Tel [phone]  Fax [phone]  www.belfuse.com