English
Language : 

0RCY-C0TV2X Datasheet, PDF (1/6 Pages) Bel Fuse Inc. – ISOLATED DC/DC CONVERTERS
ISOLATED DC/DC CONVERTERS
48 Vdc Input 1.2 Vdc /50 A Output
0RCY-C0TV2x RoHS Compliant PRELIMINARY Rev.B
• Isolated
• Input Under-Voltage Lockout
• High Efficiency
• Output Voltage Trim
• High Power Density
• OCP/SCP
• Fixed Frequency (300 kHz)
• Over Temperature Protection
• Low Cost
• Remote On/Off
• Basic Insulation
• Positive/Negative Remote Sense
• Start-up into Pre-biased Load
• Output Over-Voltage Protection with Auto-recovery
• Secondary Side Control for Fast Transient Response and High Reliability
Description
The 0RCY-C0TV2x is isolated dc/dc converter that operates from a nominal 48 Vdc source. This secondary side
control unit will provide up to 60 W of output power from a nominal 48 Vdc input. Features include start-up into
pre-biased load, remote on/off, over current protection and under-voltage lockout. This converter is provided in an
industry standard eighth brick package.
Part Selection
Output
Voltage
Input Voltage
1.2 Vdc
48 Vdc
Max. Output
Current
50 A
Max. Output
Power
60 W
Typical
Efficiency
86%
Model Number
Active High
0RCY-C0TV20
Model Number
Active Low
0RCY-C0TV2L
Notes: 1. All part numbers above indicate RoHS 6. Change the second letter "R" to "7" for RoHS 5 part numbers.
2. Add “G” suffix at the end of the model number to indicate Tray Packaging.
Absolute Maximum Ratings
Parameter
Min
Typ
Max
Notes
Input Voltage (continuous)
-0.3 V
-
80 V
Input Voltage (transient)
-
-
100 V
100 mS
Remote On/Off
-0.3 V
-
18 V
I/O Isolation Voltage
1500 V
-
-
Ambient Temperature
-40 °C
-
85 °C
Storage Temperature
-55 °C
-
125 °C
Input Specifications
Parameter
Input Voltage
Input Voltage Transient Rate
Input Current (full load)
Input Current (no load)
Remote Off Input Current
Back Drive Current Limit from Pre-
biased Output while Pin On-Off is
Enabled (Pk)
Min
36 V
-
-
-
-
-
Typ
48 V
-
-
30 mA
2 mA
-
Max
75 V
7 V/mS
3.0 A
50 mA
5 mA
500 mA
Notes
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com