0804-5000-01 Datasheet, PDF (1/3 Pages) Bel Fuse Inc. – POWERLINE MODULES SIMPLE Embedded PowerPacket Modules

POWERLINE MODULES
SIMPLE™ Embedded PowerPacket™ Modules
FEATURES
• All-in-one HomePlug™ 1.0 embedded modules
based on Intellon’s advanced INT5200 single-chip
powerline solution
• Pin and function compatible with the previous
generation INT51MX modules
• Integrates all components necessary to add
HomePlug functionality to any embedded system
at industry’s lowest cost
• Compact vertical or right-angle mounting
configuration using Intellon’s SIMPLE PowerBus™
connector
• Configurable for optimum performance in six foot
AC/DC corded or wallplug (zero feet) applications
• Operates from a single 3.3V supply
• Minimum footprint
• HomePlug 1.0 compliant
• Simplifies development cycle, assembly and test
Part Number
0804-5000-01
0804-5000-02
Description
Right Angle Mounting
Vertical Mounting
Bel’s series of embedded PowerPacket modules are the first members of the Single Inline Module – Power Line Enabled
(SIMPLE) family. These modules are specifically designed to allow future Intellon ICs to be used without board redesign. As
new baseband/AFE ICs are introduced by Intellon, pin and function compatible SIMPLE modules can be used to provide
improved functionality and/or reduced cost without requiring any redesign of products using SIMPLE modules.
Based on the industry leading Intellon single-chip PowerPacket transceiver, these modules integrate most of the components
required in a HomePlug solution on a tiny single in-line package. This package can be easily connected into any existing
embedded system via the proprietary SIMPLE PowerBus™ header instantly adding HomePlug functionality with virtually no
PCB space and without the hassle of a system redesign.
Each module integrates the chip, crystal, EEPROM, discrete RX filter and DC regulators into one single device. The only
external components required are the PLC coupler and transient protection on the AC side of the main power supply. The
host interface for any of the modules can be configured to be MII PHY, GPSI PHY or MII Host/DTE.
The modules are truly the industry’s most integrated and cost effective way of adding HomePlug 1.0 functionality to any
embedded networking or consumer electronics product.
In Partnership with
©2004 Bel Fuse Inc. Specifications subject to change without notice. 01.15.04
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com