07CM-38S10L Datasheet, PDF (1/5 Pages) Bel Fuse Inc. – Bus Converter 48V Input / 9.3V Output / 36.5A

Bus Converter
48V Input / 9.3V Output / 36.5A
07CM-38S10L PRELIMINARY
• Ideal for Intermediate Bus Architectures
• Industry standard quarter-brick package
• Up to 300W at 95% efficiency
• 1500V isolation
• Safety Agency Approvals
Description
The 07CM-38S “Cimarron” Series are isolated DC/DC converters that operate from a nominal 48V source.
These converters are intended to provide isolation and step down to generate an intermediate bus for the
purpose of powering non-isolated Point-of-Load (POL) converters. These units will provide up to 300W of
output power from a 54V input. These units are designed to be highly efficient and very low cost and are thus
unregulated. The downstream POL converters will provide the precise regulation required by the load.
Features include remote on/off, over current protection and undervoltage lockout. These converters are
provided in an industry standard quarter-brick package.
Part Selection
Output
Input Voltage
Voltage
9.3V
48V
Max. Output
Current
36.5A
Max. Output
Power
300W
Typical
Efficiency
95%
Model Number
07CM-38S10L
Input Specifications
Parameter
Input Voltage Range
Input Current (no load)
Input Current (full load)
Reflected Ripple Current
(pk-pk)
Undervoltage Lockout
Turn-on
Turn off
Overvoltage Lockout
Output Specifications
Parameter
Output Voltage
36Vin
48Vin
55Vin
Output Current
Output Power
Load Regulation
Ripple and Noise
Min
36 VDC
Min
0A
Load Capacitance
100uF
(50mohm)
Typ
35.8 VDC
33.8 VDC
57.1 VDC
Typ
7.0V
9.3V
10.6V
Max
55 VDC
110mA
7.2A
50mA rms
100mA pk-pk
Notes
with a 12uH source inductor
at nom. Vin and full load.
Max
Notes
Setpoint at no load.
36.5A
300W
0.55V
150mV pk-pk
3000uF
0 to 20MHz Bandwidth
Use 1.0uF ceramic cap and
100uF/50mOhm tantalum on
output
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com