0560-6600-EJ Datasheet, PDF (1/2 Pages) Bel Fuse Inc. – G.SHDSL Magnetics

G.SHDSL Magnetics
TM02399
• Designed to comply with the requirements of UL1950
and EN60950 to provide a supplementary insulation
barrier with a working voltage of 250V
• Operating and storage temperature range: -40° to +85° C
• Meets IEC 695, 2-2 flammability requirements
• Minimum interwinding breakdown voltage of 1500 Vrms • PWB Process Capability: standard printed wiring board
assembly techniques, total-immersion cleaning
• Minimum interwinding breakdown voltage of 600 Vrms
between pin 9 and 10 for 1 minute
• Reliability testing: shock, vibration, temperature cycling,
temperature - humidity - bias
ELECTRICAL SPECIFICATIONS AT 25° C
Part Number
Turns Ratio
±2%
Inductance¹
mH ±5%
Leakage
Inductance
µH max
DCR
Ω
max
Chip : Line Line Side Chip Side Chip Side Line Side
Longitudinal
Balance²
dB min
10 kHz -
400 kHz
0560-6600-EJ
1 : 1.8
2.75
17
4.4
1.85
50
Insertion
Loss
dB max
300 kHz
1.6
All measurements are made with pins 2 and 4 connected and pins 1 and 9 connected
1. Inductance measured at 10 kHz, 0.1 Vac
2. Measured at 100 kHz, 0.1 Vac
3. Measured with line impedance of 135 Ω and chip impedance of 41.66 Ω
Harmonic
Distortion²
dB max
13.5 dBm
@ 5 kHz
80
SCHEMATIC
0560-6600-EJ
1
9
4
Line
IC
2
5
7
©2002 Bel Fuse Inc. Specifications subject to change without notice. 04.02
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com
page 1