0560-6600-CP Datasheet, PDF (1/2 Pages) Bel Fuse Inc. – G.SHDSL Magnetics Globespan

G.SHDSL Magnetics
Globespan
TM01347
• Designed to comply with the requirements of GR1089, • Operating and storage temperature range: -40° to +85° C
UL1950, EN60950, BABT and CSA950 to provide a
supplementary insulation barrier with a working voltage • Meets IEC 695, 2-2 flammability requirements
of 250V
• PWB Process Capability: standard printed wiring board
• UL File Number E150991
assembly techniques, total-immersion cleaning
• Minimum interwinding breakdown voltage of 1500 Vrms • Reliability testing: shock, vibration, temperature cycling,
temperature - humidity - bias
ELECTRICAL SPECIFICATIONS AT 25° C
Part Number
Turns Ratio
±2%
Inductance¹
mH ±4%
Leakage
Inductance²
µH max
DCR³
Ω
max
Chip : Line
(1-5)
(1-5)
Chip Line
Side Side
Interwinding
Capacitance⁴
pF max
Chip : Line
Longitudinal
Balance⁵
dB max
20kHz -
300kHz
Insertion
Loss⁵
dB max
Frequency
Response⁵
dB max
100kHz
40kHz -
300kHz
Harmonic
Distortion⁵
dB max
5kHz
Fundamental
0560-6600-CP
1:4
2.07
13
0.40 1.45
85
All measurements are made with pins 2 and 4 connected.
1. Inductance measured at 10kHz, 0.1 Vac.
2. Leakage inductance measured at 10 kHz, 0.1 Vac. Short terminals 7 and 9.
3. DCR requirement is for each winding.
4. Interwinding capacitance measured at 10 kHz, 0.1 Vac.
5. Measurements made with 135Ω source and 8.4Ω load impedance.
-55
0.50
0.30
-75
SCHEMATIC
0560-6600-CP
1
9
Chip
7
4
Line
2
5
©2001 Bel Fuse Inc. Specifications subject to change without notice. 07.01
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com
page 1