AP3602A Datasheet, PDF (2/17 Pages) BCD Semiconductor Manufacturing Limited – 100mA REGULATED CHARGE PUMP

100mA REGULATED CHARGE PUMP
Pin Configuration
K Package
(SOT-23-6)
V_OUT
16
C+
GND
25
V_IN
SHDN
34
C-
Figure 2. Pin Configuration of AP3602A/B (Top View)
Data Sheet
AP3602A/B
Pin Description
Pin Number Pin Name
Function
1
V_OUT
Regulated Output Voltage. V_OUT should be bypassed with a 1µF to 22µF low ESR ceramic
capacitor which is placed as close to the pin as possible for best performance
2
GND
Ground. GND should be tied to a ground plane for best performance. The C_OUT and C_IN
should be placed as close to this pin as possible
Active Low Shutdown Input. A low signal on SHDN disables the AP3602A/B, while a high
3
SHDN
signal enables the AP3602A/B. SHDN pin must not be allowed to float
4
C-
Flying Capacitor Negative Terminal. The flying capacitor should be placed as close to this pin
as possible
5
V_IN
Input Supply Voltage. V_IN should be bypassed with a 1µF to 22µF low ESR ceramic capacitor
which is placed as close to the pin as possible for best performance
6
C+
Flying Capacitor Positive Terminal. The flying capacitor should be placed as close to this pin
as possible
Apr. 2007 Rev. 1.2
BCD Semiconductor Manufacturing Limited
2