AP4302_06 Datasheet, PDF (1/12 Pages) BCD Semiconductor Manufacturing Limited – QUAD OP AMP AND VOLTAGE REFERENCE

Data Sheet
QUAD OP AMP AND VOLTAGE REFERENCE
General Description
Features
AP4302
The AP4302 is a monolithic IC specifically designed
to regulate the output current and voltage levels of
switching battery chargers and power supplies.
The device contains quad Op Amps and a 2.5V exter-
nally adjusted voltage reference in a 16-pin package.
The four Op Amps feature accurate voltage and current
control. Combining a stable voltage reference with the
four Op Amps makes AP4302 ideal for use in multi-
function charger, power supply voltage monitor, signal
processing and control system.
The IC offers the power converter designer a control
solution that features increased precision with a corre-
sponding reduction in system complexity and cost.
Op Amp
· Input Offset Voltage: 0.5mV
· Supply Current: 250µA per Op Amp at 5.0V Sup-
ply Voltage
· Unity Gain Bandwidth: 1MHz
· Output Voltage Swing: 0 to (V_CC-1.5)V
· Power Supply Range: 3 to 18V
Voltage Reference
· Reference Voltage Tolerance: 0.5%, 1%
· Sink Current Capability from 0.1 to 80mA
· Output Dynamic Impedance: 0.2Ω
· Externally Adjusted Voltage Reference: 2.5V
The AP4302 is available in standard packages of DIP-
16 and SOIC-16.
Applications
· Battery Charger
· Switching Power Supply
· Mother Board
SOIC-16
DIP-16
Figure 1. Package Types of AP4302
Jul. 2006 Rev. 1. 2
BCD Semiconductor Manufacturing Limited
1