|
AP2815 Datasheet, PDF (1/16 Pages) BCD Semiconductor Manufacturing Limited – 1.5A High-side Power Distribution Switch with Enable and Flag | |||
|
Advance Datasheet
1.5A High-side Power Distribution Switch with Enable and Flag
AP2815
General Description
The AP2815 is an integrated high-side power switch
that consists of N-Channel MOSFET, charge pump,
over current & temperature and other related protection
circuits. The switchâs low RDS(ON), 60mâ¦, is designed
to meet the USB voltage drop requirements. The IC
integrates soft-start to limit inrush current,
over-current protection, load short protection with
fold-back, and thermal shutdown to avoid switch
failure during hot plug-in. Under voltage lockout
(UVLO) function is used to ensure the device
remains off unless there is a valid input voltage
present. A FLAG output is available to indicate fault
conditions to the local USB controller.
The AP2815 is available in standard packages of
SOIC-8 and MSOP-8.
Features
⢠Low MOSFET on Resistance: 60m⦠@
VIN=5.0V
⢠Compliant to USB Specifications
⢠Operating Voltage Range: 2.7V to 5.5V
⢠Low Supply Current: 65µA (Typ.)
⢠Low Shutdown Current: 1.0µA (Max)
⢠Guarantee 1.5A Continuous Load
⢠Current Limit: 1.65A (Min), 2.8A (Max)
⢠Under-voltage Lockout
⢠Logic Level Enable Pin:
eAvailable in Active-high or Active-low Version
⢠Soft Start-up
⢠Over-current Protection
⢠Over Temperature Protection
⢠Load Short Protection with Fold-back
⢠No Reverse Current when Power Off
⢠Deglitched FLAG Output with Open Drain
⢠eWith Output Shutdown Pull-low Resistor for
eA/C Versions
⢠UL Approved (File No. E339337)
⢠Nemko CB Scheme IEC60950-1, Ref. Certif
No. NO64001
Applications
⢠USB Power Management
⢠USB Bus/Self Powered Hubs
⢠Hot-plug Power Supplies
⢠Battery-Charger circuits
⢠Notebook, Motherboard PCs
Apr. 2012 Rev 1. 7
SOIC-8
MSOP-8
Figure 1. Package Types of AP2815
BCD Semiconductor Manufacturing Limited
1
|
▷ |