AP1682 Datasheet, PDF (1/11 Pages) BCD Semiconductor Manufacturing Limited – Single Stage Primary Side Regulation PFC Controller For LED Driver

Data Sheet
Single Stage Primary Side Regulation PFC Controller For LED Driver
AP1682
General Description
The AP1682 is a high performance AC/DC universal
input Primary Side Regulation Power Factor
Controller for LED driver applications. The device
uses Pulse Frequency Modulation (PFM) technology
to regulate output current while achieving high power
factor and low THD.
The AP1682 provides accurate constant current (CC)
regulation while removing the opto-coupler and
secondary control circuitry. It also eliminates the
need of loop compensation circuitry while
maintaining stability. The AP1682 achieves excellent
regulation and high efficiency, yet meets the
requirement of IEC61000-3-2 harmonic standard.
The AP1682 features low start-up current, low
operation current and high efficiency. It also has rich
protection features including over voltage, short
circuit, over current, over temperature protection etc.
The AP1682 is available in SOIC-8 package.
Features
• Primary Side Control for Output Current
Regulation Without Opto-coupler and Secondary
CV/CC Control Circuitry
• Low Start-up Current
• High Power Factor and Low THD for Universal
Input Range
• Tight CC Regulation Performance for Universal
Input Mains Voltage Range
• Eliminates Control Loop Compensation
Circuitry
• Built-in Acceleration Start
• Open-load and Reload Detection
• Over Voltage and Short Circuit Protection
• Over Temperature Protection
• Over Current Protection
• Cost Effective Total PFC LED Driver Solution
Applications
• Single Stage Power Factor Correction Power
Supply for LED Lighting
Dec. 2011 Rev. 1. 1
SOIC-8
Figure 1. Package Type of AP1682
BCD Semiconductor Manufacturing Limited
1