AZP96_12 Datasheet, PDF (3/6 Pages) Arizona Microtek, Inc – PECL/ECL Differential Receiver

Arizona Microtek, Inc.
ENGINEERING NOTES
AZP96
PECL/ECL Differential Receiver
The AZP96 provides a V_BB output for single-ended use or a DC bias reference for AC coupling to the device. For single-
ended input applications, the V_BB reference should be connected to one side of the D/D¯ differential input pair. The input
signal is then fed to the other D/D¯ input. The V_BB pin can support 1.5 mA sink/source current. When used, the V_BB pin
should be bypassed to ground via a 0.01 µF capacitor.
Measured with 750mv differential input, Q/Q¯ each terminated to V_CC-2V via 50 Ω resistors.
.
Figure 3 – AZ100LVEL16 typical large signal output swing graph
www.azmicrotek.com
[phone]
3
Request a Sample
May 2012, Rev 2.0