AZG489 Datasheet, PDF (3/5 Pages) Arizona Microtek, Inc – PECL Video Cable Driver

AZG489
1μF MIN¹
+5V
AZG489
VCC
D
0.1μF MIN²
D
V_EE
FERRITE BEAD
(1KΩ @ 100 MHz)
0.1μF⁴
Q0
75Ω COAX
75Ω
75Ω
Q1
150Ω³
Q2
0.1μF⁴
Q3
75Ω COAX
75Ω
75Ω
150Ω³
1. Required if AZG489 is more than 30mm from regulated source.
2. Place as close to the AZG489 as possible.
3. DC load resistor value range: 100Ω to 200Ω.
4. Typical values, select as needed for application.
Figure 1. Typical Application
November 2006 * REV - 2
www.azmicrotek.com
3