AZ10EP16VS Datasheet, PDF (1/10 Pages) Arizona Microtek, Inc – ECL/PECL Differential Receiver with Variable Output Swing

ARIZONA MICROTEK, INC.
AZ10EP16VS
AZ100EP16VS
ECL/PECL Differential Receiver with Variable Output Swing
FEATURES
PACKAGE AVAILABILITY
• Silicon-Germanium for High Speed
Operation
• 150ps Typical Propagation Delay
• AZ100EP16VS Functionally Equivalent
to ON Semiconductor MC100EP16VS
at 3.3V
• Available in a 3x3mm MLP Package
• S-Parameter (.s2p) and IBIS Model Files
available on Arizona Microtek Website
DESCRIPTION
PACKAGE
PART NUMBER MARKING NOTES
SOIC 8
AZ10EP16VSD
AZM10
EP16VS
1,2,3
SOIC 8
AZ100EP16VSD
AZM100
EP16VS
1,2,3
TSSOP 8
AZ10EP16VST
AZTP
EP16VS
1,2,3
TSSOP 8
AZ100EP16VST
AZHP
EP16VS
1,2,3
AZM
MLP 16 (3x3)
AZ10/100EP16VSL
16S
1,2
<Date Code>
MLP 16 (3x3)
AZM+
RoHS Compliant / AZ10/100EP16VSL+ 16S
1,2
Lead(Pb) Free
<Date Code>
1 Add R1 at end of part number for 7 inch (1K parts), R2 for 13 inch (2.5K parts) Tape
& Reel.
2 Date code format: “Y” or “YY” for year followed by “WW” for week.
3 Date code “YWW” or “YYWW” on underside of part.
The AZ10/100EP16VS is a Silicon–Germanium (SiGe) differential receiver with variable output swing. The
EP16VS has functionality and output transition times similar to the EP16, with an input that controls the amplitude
of the Q/Q¯ outputs.
Connecting the BOOST pin to V_EE increases the output swing by about 15% above standard ECL/PECL levels.
The BOOST pin is internally tied to V_EE for the SOIC 8 and TSSOP 8 packages, and is under external user control
for the MLP 16 package. When both the BOOST pin and the V_CTRL pin are not connected, the part operates with the
standard ECL/PECL output and V_BB levels of the AZ10/100EP16 device. To ensure best performance, the BOOST
pin should be tied to V_EE when the variable swing feature is used.
The operational range of the EP16VS control input, V_CTRL, is from V_REF (full swing) to V_CC (min. swing).
Maximum swing is achieved by leaving the V_CTRL pin open or tied to V_EE. Simple control of the output swing can be
obtained by a variable resistor between the V_REF and V_CC pins, with the wiper driving V_CTRL. Typical application
circuits and results are described in this Data Sheet.
The EP16VS provides a V_REF (V_BB/V_REF) output for a DC bias when AC coupling to the device. The V_REF pin
should be used only as a bias for the EP16VS as its current sink/source capability is limited. Whenever used, the
V_REF pin should be bypassed to ground via a 0.01μF capacitor.
Under open input conditions for D/D¯ , the Q/Q¯ outputs are not guaranteed.
NOTE: Specifications in ECL/PECL tables are valid when thermal equilibrium is established.
1630 S. STAPLEY DR., SUITE 127 • MESA, ARIZONA 85204 • USA • [phone] • FAX [phone]
www.azmicrotek.com