AZSR126 Datasheet, PDF (1/2 Pages) ZETTLER Electronics – 26 AMP MINIATURE POWER RELAY

AZSR126
26 AMP MINIATURE
POWER RELAY
FEATURES
• Dielectric strength 4500Vrms
• 31 Amp switching
• Contact gap > 1.8mm
• Clearance / creepage > 6.4 / 7.5mm
• UL, CUR E44211
• VDE pending
CONTACTS
Arrangement SPST (1 Form A)
Ratings
Resistive load:
Rated Load
UL
Max. switched power: 8587VA
Max. switched current: 31A
Max. switched voltage: 277 VAC
26A at 277 VAC, resistive, 75°C, 50k cycles
26A at 250 VAC, resistive, 75°C, 50k cycles
22A at 277 VAC, resistive, 85°C, 100k cycles
22A at 250 VAC, resistive, 85°C, 100k cycles
VDE
31A at 277 VAC, cos phi 0.8, 85°C, 50k cycles *
31A at 250 VAC, cos phi 0.8, 85°C, 50k cycles *
26A at 277 VAC, resistive, 85°C, 50k cycles
26A at 250 VAC, resistive, 85°C, 50k cycles
22A at 277 VAC, resistive, 85°C, 100k cycles
22A at 250 VAC, resistive, 85°C, 100k cycles
* duty factor: 0.1 seconds on / 10 seconds off
Material
Resistance
Silver tin oxide
< 100 milliohms initially
(at 6V, 1A, voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
690mW
2.0W at 20°C (68°F) ambient
90°C (194°F) at nominal coil voltage
Max. 155°C (311°F)
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time
Release Time
Dielectric Strength
(at sea level for 1 min.)
Insulation Resistance
Holding Voltage
Dropout
Ambient Temperature
Operating
Storage
Vibration
Shock
Enclosure
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
Minimum operations
2 x 10⁵
5 x 10⁴ at 26A 250 VAC Res.
20ms max. at nominal coil voltage
10ms max. at nominal coil voltage
(with no coil suppression)
4500Vrms coil to contact
2500Vrms between open contacts
1000 megaohms min. at 20°C,
500 VDC 50% RH
Greater than 35% of nominal coil voltage
Greater than 10% of nominal coil voltage
at nominal coil voltage
-40°C (-40°F) to 60°C (140°F)
at max. 80% of nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 105°C (221°F)
1.5mm DA at 10-55 Hz
20 g
P.B.T. polyester
Tinned copper alloy, P.C.
260°C (500°F)
5 seconds
80°C (176°F)
30 seconds
25 grams
NOTES
1. All values at 20°C (68°F)
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
8/17/15