AZ992 Datasheet, PDF (1/2 Pages) American Zettler, Inc. – Designed for Headlight control, Fuel pump control

AZ992
20 AMP
AUTOMOTIVE RELAY
FEATURES
•Designed for Headlight control, Fuel pump control,
A/C compressor clutch, and more
• Vibration and shock resistant
• Epoxy sealed version available
• 2.8mm QC terminals
CONTACTS
Arrangement
Ratings
SPST (1 Form A)
Resistive load:
Max. switched power: 280W
Max. switched current: 20A
Max. switched voltage: 50VDC
Rated load:
20A/20A (make/break) at 13.5VDC Resistive
40A/20A (make/break at 13.5VDC Inductive
100A/20A(make/break) at 13.5VDC Lamp
Material
Resistance
Silver tin oxide (AgSnO2 )
< 100 milliohms initially
(6 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
334 mW
Max Temperature
125°C (257°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time
Minimum operations
1 x 10⁶
1 x 10⁵ at 20 A 13.5 VDC Resistive
5 ms typical at nominal coil voltage
Release Time
3 ms typical at nominal coil voltage
Dielectric Strength
500 VAC coil to contact
(at sea level for 1 min.) 500 VAC between open contacts
Insulation Resistance 100 megohms min. at 500 VDC
85% RH (at 40°C)
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
-40°C (-40°F) to 125°C (257°F)
Storage
-40°C (-40°F) to 125°C (257°F)
Vibration
10-40 Hz double amplitude 1.27mm
Shock
20 G
Enclosure
P.B.T. polyester
Terminals
2.8mm QC
Max. Solder Temp
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp
80°C (176°F)
Max. Immersion Time 30 Seconds
Weight
11 grams
1/3/13