AZ9701E Datasheet, PDF (1/2 Pages) American Zettler, Inc. – 45 AMP AUTOMOTIVE RELAY

AZ9701E/AZ9711E
45 AMP AUTOMOTIVE RELAY
FEATURES
• Up to 45 Amp switching capability in a compact size
• Epoxy sealed versions available
• Coils to 24 VDC
• Small footprint
• 1 Form A and C contacts available
• Vibration and shock resistant
• ISO/TS 16949, ISO9001, ISO14000
• Tested in accordance with SAE J2544
• Cost effective
• Designed for high in-rush applications
• UL, CUR File E43203
CONTACTS
Arrangement
Ratings
UL, CUR
Material
Resistance
SPST (1 Form A)
SPDT (1 Form C)
Resistive load:
Max. switched power: Form A: 630 W
Form C: 630 W/420W N.O./N.C.
Max. switched current: Form A: 45 A
Form C: 45 A/30A N.O./N.C.
Max. switched voltage: 150* VDC
Max. carry current: 60 A
* If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
45A at 14VDC Res. 10k cycles (1 Form A)
Silver tin oxide (silver nickel available - contact factory)
< 100 milliohms initially
(24 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Max. Temperature
484-573 mW standard coil
675 mW sensitive coil
4.2W 20°C (68°F) ambient
50°C (90°F) nominal coil VDC
155°C (311°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
5 x 10⁶ operations
1 x 10⁵ 40 A 14 VDC Res.
Operate Time (typical) 5 ms at nominal coil voltage
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
500 VDC coil to contact
(at sea level for 1 min.) 500 VDC between open contacts
Insulation Resistance 100 megohms min. at 20°C (68°F), 500 VDC,
50% RH
Dropout
Greater than 6% of nominal coil voltage
Ambient Temperature
Operating
Storage
Vibration
At nominal coil voltage
-40°C (-40°F) to 135°C (275°F)
-40°C (-40°F) to 155°C (311°F))
10-40 Hz – 1.27 mm DA
40-70 Hz – 50 m/s²
70-100 HZ – 0.5 mm DA
100-500 Hz – 100 m/s²
Shock
20 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
20 grams
6/29/06W