AZ956P Datasheet, PDF (1/2 Pages) ZETTLER Electronics – MICROMINIATURE POLARIZED BISTABLE (LATCHING) RELAY

AZ956P
MICROMINIATURE
POLARIZED BISTABLE
(LATCHING) RELAY
FEATURES
• Microminiature size: up to 50% less board area than
previous generation telecom relays
• Meets FCC Part 68.302 1500 V lightning surge
• High dielectric and surge voltage:
• Low power consumption: 36 mW pickup
• Stable contact resistance for low level signal switching
• Epoxy sealed for automatic wave soldering and cleaning
• UL, CUR file E43203
• All plastics meet UL94 V–0, 30 min. oxygen index
CONTACTS
Arrangement
SPDT (1 Form C)
Bifurcated crossbar contacts
Ratings
Resistive load:
Max. switched power: 30 W or 60 VA
Max. switched current: 1.0 A
Max. switched voltage: 150 VDC or 125 VAC
Rated Load
UL
0.5 A at 120 VAC
1.0 A at 30 VDC
Material
Palladium nickel with gold-rhodium overlay
Resistance
< 50 milliohms initally
(6 V, 10 mA method)
COIL (Polarized)
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
36 mW
0.5 W at 20°C (68°F)
At nominal coil voltage
8°C (15°F)
Temperature
Max. 105°C (221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may set or reset in with less than “Must Operate” value.
3. Relay has fixed coil polarity.
4. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10⁹
2.5 x 10⁵ at 0.4 A, 125 VAC, resistive
3 x 10⁶ at 1.0 A, 24 VDC, resistive
Set Time
(typical)
Reset Time (typical)
1 ms at nominal coil voltage
0.9 ms at nominal coil voltage
Bounce (typical)
At 10 mA contact current
1 ms at set or reset
Dielectric Strength
(at sea level)
1500 Vrms contact to coil
500 Vrms between open contacts
Insulation Resistance 10⁹ ohms min. at 25°C, 500 VDC,
50% RH
Ambient Temperature At nominal coil voltage
Operating
-40°C (-40°F) to 70°C (158°F)
Storage
-40°C (-40°F) to 105°C (221°F)
Vibration
Operational, 40 g, 10–200 Hz
Shock
Operational, 50 g min., 11 ms
Non-destructive, 150 g min., 11 ms
Max. Solder Temp.
Temp./Time
Vapor phase: 215°C, 40 Sec.
Infrared: 215°C, 40 Sec.
Double wave: 260°C, 10 Sec.
Max. Solvent Temp.
Max. Immersion Time
Weight
80°C (176°F)
30 seconds
1.8 grams
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
7/24/02W