AZ9481F Datasheet, PDF (1/2 Pages) American Zettler, Inc. – 16 AMP LOW PROFILE POWER RELAY

AZ9481F
16 AMP LOW PROFILE
POWER RELAY
FEATURES
• Quick connect and PC terminals
• High power switching (4000 VA)
• High sensitivity, 128 mW pickup
• Low profile (less than .55" height)
• SPST (1 Form A)
• UL Class F (155°C) standard
• Epoxy sealed versions available
• DC coils up to 48 VDC
• UL file E43203, TÜV R50053055
CONTACTS
Arrangement
Ratings
SPST (1 Form A)
Resistive load:
Standard
1 Form A
Max. switched power: 300 W, 2500 VA
Max. switched current: 10 A
Max. switched voltage: 250 VAC / 30 VDC
High Capacity
1 Form A
Max. switch power: 300 W, 4000 VA
Max. switch current: 16 A
Max. switched voltage: 250 VAC / 30 VDC
Rated Load
UL
Standard 1 Form A
10 A at 250 VAC Res. 100k cycles [1][2]
10 A at 30 VDC Res. 100k cycles [1][2]
TV-5 [1][2]
High Capacity 1 Form A
16 A at 125 VAC Res. 100k cycles [1][2]
10 A at 30 VDC Res. 100k cycles [1][2]
TV-5 [1][2]
TÜV
High Capacity 1 Form A
16 A at 250 VAC Res. 100k cycles [1][2]
8 A at 250 VAC cos phi = 0.4 100k cycles [1][2]
10 A at 30 VDC Res. 100k cycles [1][2]
Material
Resistance
Silver cadmium oxide [1] or silver tin oxide [2]
Gold plating available.
< 100 milliohms initially
(6 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
128 mW
1.34 W at 20°C (68°F)
13°C (23°F) at nominal coil voltage
Max. 155°C (333°F)
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10⁷
1 x 10⁵ 10 A 250 VAC Res.
Operate Time (typical) 10 ms at nominal coil voltage
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
2500 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms contact to contact
Insulation
Resistance
100 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Storage
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 155°C (333°F)
Vibration
0.062" DA at 10–55 Hz
Shock
10 g operational, 100g destructive
Enclosure
P.B.T. polyester
Terminals
Max. Solder Temp.
Tinned copper alloy, P.C. with quick
connect tabs
Note: Allow suitable slack on leads when wiring,
and do not subject the terminals to excessive
force.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
8 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
12/14/05W