AZ946 Datasheet, PDF (1/2 Pages) ZETTLER Electronics – MINIATURE PC BOARD RELAY

AZ946
MINIATURE
PC BOARD RELAY
FEATURES
• Subminiature size
• Coils to 48 VDC
• Epoxy sealed for automatic wave soldering
• Contacts rated at 6 Amps
• Life expectancy to 20 million operations
• Extremely low cost
• UL, CUR file E43203
CONTACTS
Arrangement
Max. Ratings
Material
Resistance
2 Form C (DPDT)
Noninductive load:
Max. switched power: 180 W or 1385 VA
Max. switched current: 6 A
Max. switched voltage: 150* VDC or 300 VAC
UL Rating: 5 A at 30 VDC resistive, 100k cycles
5 A at 277 VAC general use
(100k cycles)
6 A at 30 VDC resistive
6 A at 125 VAC resistive
* If switching voltage is greater than 30 VDC
special precautions must be taken. Please
contact the factory
Silver Cadmium Oxide, gold plated
100 milliohms max.
(6 V 1 A method)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
384 mW
1.2 W at 20°C (68°F)
35°C (63°F)
Max. Temperature
105°C (221°F)
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
2 x 10⁷
1 x 10⁵ 5 A 277 VAC Res.
Operate Time (typical) 5 ms at nominal coil voltage
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
(at sea level for 1 min.)
Insulation
Resistance
1000 Vrms coil to contact
750 Vrms between open contacts
1000 Vrms contact set to contact set
100 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
-10°C (14°F) to 60°C (140°F)
Storage
-10°C (14°F) to 105°C (221°F)
Vibration
0.062" DA at 5–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P. C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max.Solvent Temp.
80°C (176°F)
Max. Immersion Time 30 seconds
Weight
12 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4. Unsealed relays should not be dipped cleaned
5/20/04W