AZ9431 Datasheet, PDF (1/2 Pages) American Zettler, Inc. – 15 AMP MINIATURE PC BOARD RELAY

AZ9431
15 AMP
MINIATURE
PC BOARD RELAY
FEATURES
• High performance
• Low seated height
• 6 kV surge version available
• Flux tight and sealed versions available
• Class B insulation (130°C) standard, Class F (155^°C) available
• UL, CUR file E43203
CONTACTS
Arrangement
SPST N.O. (1 Form A)
SPDT (1 Form C)
Ratings
Medium Duty
Heavy Duty
Max. switched power: 240 W or 1200 VA
Max. switched current: 10 A
Max. switched voltage: 150* VDC or 300 VAC
Max. switched power: 360 W or 2500 VA
Max. switched current: 15 A
Max. switched voltage: 150* VDC or 300 VAC
UL/CUR Ratings
Medium Duty 10 A at 120 VAC, General Use
10 A at 24 VDC, General Use
Heavy Duty
10 A at 250 VAC, General Use
15 A at 120 VAC, General Use
15 A at 24 VDC, General Use
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Material
Medium Duty: Silver cadmium oxide
Heavy Duty: Silver tin oxide
Resistance
< 100 milliohms initially
(24 V, 1 A method)
COIL
Power
At Pickup Voltage
Max Continuous
Dissipation
Temperature Rise
(at nominal coil voltage)
Temperature
203 mW
1.7 W at 20°C (68°F)
22°C (40°F)
Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Unsealed relays should not be dip cleaned.
4. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
1 x 10⁶
1 x 10⁵ at 10 A 120 VAC res.
Operate Time
10 ms max.
Release Time
5 ms max.
(with no coil suppression)
Dielectric Strength
3000 Vrms contact to coil (6 kV version)
(at sea level for 1 min.) 1500 Vrms contact to coil
1000 Vrms across contacts
Insulation Resistance 100 megohms min. at 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Storage
Vibration
Shock
At nominal coil voltage
-40°C(-40°F) to 100°C(212°F)
-40°C(-40°F) to 155°C(311°F)
0.062" DA at 10–55 Hz
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
10 g
5/26/05W