AZ9371 Datasheet, PDF (1/3 Pages) ZETTLER Electronics – SENSITIVE SUBMINIATURE RELAY

AZ9371
SENSITIVE
SUBMINIATURE RELAY
FEATURES
• Extremely small footprint
• Thin vertical profile only 0.275" (7 mm) wide
• High sensitivity, 113 mW pickup
• Dielectric strength 4000 Vrms
• 5 Amp switching capability (version “T” 10 Amp)
• Two different footprints available
• UL, CUR file E44211
• VDE 40030746
CONTACTS
Arrangement
Ratings
SPST (1 Form A)
Resistive load:
Max. switched power: 150 W or 1385 VA
(Version “T”: 300 W or 2770 VA)
Max. switched current: 5 A
(Version “T”: 10 A)
Max. switched voltage: 30 VDC* or 277 VAC
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Rated Load
UL/CSA
VDE
Material
Resistance
5 A at 277/250/125 VAC General Use [1][2]
5 A at 30 VDC General Use [1][2]
B300 Pilot Duty 120/240 VAC, 125/250VAC [2]
"T" Version
10 A at 277/250/125 VAC General Use [1][2]
10 A at 30 VDC General Use [1][2]
5 A at 250 VAC / 30 VDC [1][2]
10 A at 250VAC / 30 VDC (T version)
Silver nickel [1], silver tin oxide [2],
gold plating available
< 100 milliohms initially
(at 6 V, 1 A, voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
113 mW
Max. Continuous
Dissipation
750 mW at 20°C (68°F) ambient
Temperature Rise
Temperature
26°C (47°F) at nominal coil voltage
Max. 105°C (221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Standard version
Electrical
Minimum operations
5 million operations
1 X 10⁵ at 5 A, 250 VAC res. [1]
5 X 10⁴ at 5 A, 250 VAC res. [2]
High capacity version “T”
Electrical
1 X 10⁵ at 7 A, 250 VAC res. [1]
1 X 10⁴ at 10 A, 250 VAC res. [1][2]
3 X 10⁴ at 7 A, 250 VAC res. [2]
Operate Time (typical) 10 ms at nominal coil voltage
Release Time (typical) 10 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
4000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature
Operating
Storage
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 105°C (221°F)
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time 30 seconds
Weight
3 grams
9/10/10