AZ935 Datasheet, PDF (1/2 Pages) ZETTLER Electronics – 20 AMP SUB-MINIATURE POWER RELAY FOR AUTOMOTIVE USE

AZ935
20 AMP MINIATURE DUAL
AUTOMOTIVE RELAY – QUIET
FEATURES
• Extremely silent operation
• Up to 20 Amp switching capability in a compact size
• Sealed
• Two separate relays in one package
• Vibration and shock resistant
• ISO/TS 16949, ISO 14000
• Tested in accordance with SAE J2544
• Cost effective
• Designed for power windows, power seats
and wiper applications
CONTACTS
Arrangement
Ratings
continuous:
Material
Resistance
DPDT (2x1-Form C)
Max. switched power: 280 W
Max. switched voltage: 100 VDC
Max. switched current (make/break),
2 Form C: 25A/20A, 20A
Silver tin oxide (silver nickel available - contact factory)
< 100 milliohms at 1A, 5 VDC
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Max. Temperature
203 mW
1.9 W 20°C (68°F) ambient
32°C (58°F) nominal coil VDC
155°C (311°F)
NOTES
1. All values at 20°C (68°F).
2. Maximum make current refers to in-rush current of lamp load.
3. Relay may pull in with less than “Must Operate” value.
4. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time (typical)
Release Time (typical)
Dielectric Strength
(at sea level for 1 min.)
Insulation Resistance
Dropout
Ambient Temperature
Operating
Storage
Vibration
Shock
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
Minimum operations
1 x 10⁷ operations
2 x 10⁵ operations at 20 A 14 VDC Res.
3 ms at nominal coil voltage
1.5 ms at nominal coil voltage
(with no coil suppression)
500 Vrms coil to contact
500 Vrms between open contacts
100 megohms min. at 20°C,
500 VDC, 50% RH
> 8.3% of nominal coil voltage
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 155°C (311°F)
0.062" DA at 10–55Hz, 10 g at 55-200 Hz
30 g, 11 ms, functional
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
10 grams
7/27/06W