AZ8A Datasheet, PDF (1/2 Pages) American Zettler, Inc. – Epoxy sealed for automatic wave soldering

AZ8A
MINIATURE
PC BOARD RELAY
FEATURES
• Subminiature size
• High sensitivity, 110 mW pickup
• Coils to 48 VDC
• Epoxy sealed for automatic wave soldering
• Contacts rated at 10 Amps
• Life expectancy to 20 million operations
• Extremely low cost
• Class B insulation (130°C) standard
• Class F insulation (155°C) version available
• UL, CUR file E44211
CONTACTS
Arrangement
Ratings
UL Rating
Material
Resistance
SPDT (1 Form C)
Resistive load:
Max. switched power: 300 W or 2400 VA
Max. switched current: 10 A
Max. switched voltage: 150* VDC or 300 VAC
10 A at 240 VAC General Use
6 A at 30 VDC Resistive
6 A at 300 VAC Resistive
Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Silver alloy
< 100 milliohms initially
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Temperature
Standard coil: 250 mW (48V coil: 341mW)
Sensitive coil: 175 mW
Class B: 2.0 W 20°C (68°F) ambient
1.6 W 40°C (104°F) ambient
Class F: 2.5 W 20°C (68°F) ambient
2.1 W 40°C (104°F) ambient
At nominal coil voltage
Standard coil: 38°C (68°F)
Sensitive coil: 28°C (50°F)
Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Other coil resistances and sensitivities available upon request.
4. Unsealed relays should not be dip cleaned.
5. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time (typical)
Minimum operations
100 million operations
1 x 10⁵ at 6 A, 120 VAC
5 ms at nominal coil voltage
Release Time (typical) 2 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
750 Vrms contact to contact
(at sea level for 1 min.) 2500 Vrms contact to coil
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature
Operating
Storage
At nominal coil voltage
-55°C (-67°F) to 90°C (194°F) Class B
-55°C (-67°F) to 115°C (239°F) Class F
-55°C (-67°F) to 130°C (266°F) Class B
-55°C (-67°F) to 155°C (311°F) Class F
Vibration
0.062" DA at 10–55 Hz, 10 g at 55–110 Hz
Shock
10 g
Enclosure
PBT polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
8 grams
1/15/13