AZ832P Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – POLARIZED DIP RELAY BISTABLE (LATCHING)

AZ832P
POLARIZED DIP RELAY
BISTABLE (LATCHING)
FEATURES
• High sensitivity, 42 mW pickup
• Low profile DIP package
• Meets FCC Part 68.302 1500 V lightning surge
• Meets FCC Part 68.304 1000 V dielectric
• Single and dual coil versions
• DC coils to 24 VDC
• High switching capacity, 60 W, 250 VA
• Fits standard 16 pin IC socket
• Epoxy sealed for automatic wave soldering and cleaning
• UL, CUR file E43203
CONTACTS
Arrangement
Ratings
Rated Load
UL
Material
Resistance
DPDT (2 Form C)
Bifurcated crossbar contacts
Resistive load:
Max. switched power: 60 W or 250 VA
Max. switched current: 2 A
Max. switched voltage: 250 VDC or 250 VAC
2 A at 30 VDC resistive
2 A at 125 VAC resistive
Gold plated silver against gold plated silver
< 50 milliohms initially
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature
Standard coil: 56 mW
Sensitive coil: 42 mW
0.9 W at 20°C (68°F)
Max. 115°C (239°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay has fixed coil polarity.
4. For complete isolation between the relay’s magnetic fields, it is
recommended that a .197" (5.0 mm) space be provided between
adjacent relays.
5. Relay adjustment may be affected if undue pressure is exerted
on relay case.
6. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
2 x 10⁷
1 x 10⁵ at 2 A, 30 VDC or 1 A, 125 VAC
2 x 10⁶ at 1 A, 30 VDC or .5 A, 125 VAC
Set Time (typical)
3 ms at nominal coil voltage
Reset Time (typical) 3 ms at nominal coil voltage
Bounce (typical)
3 ms
Dielectric Strength
(at sea level)
1500 Vrms contact to coil
1000 Vrms between contact sets
1000 Vrms across contacts
Meets FCC Part 68.302 lightning surge
Meets FCC Part 68.304 V dielectric
Insulation Resistance 1000 megohms min. at 20°C, 500 VDC,
50% RH
Ambient Temperature At nominal coil voltage
Operating
-40°C (-40°F) to 85°C (185°F)
Storage
-40°C (-40°F) to 115°C (239°F)
Vibration
50 g at 10–500 Hz
Shock
50 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
5 grams
8/3/07 W